Yamaha
Yamaha
Rio1608-D2
- Product code
- RIO1608-D2
- Category
- Audio
- Family
- interfaces
- Weight
- 9.6 kg
- Power
- 72 W
Specifications
Sampling frequency rate
- External
- 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, +4.1667%, +0.1%, –0.1%, –4.0% (±200 ppm)
Signal delay
- Signal delay
- Less than 1.7 ms, Rio INPUT to Rio OUTPUT connect with PM10 using Dante, Fs= 96 kHz, Dante Receive Latency set to 0.25 msec
Total harmonic distortion
- Total harmonic distortion
- Less than 0.05% 20 Hz-20 kHz@+4 dBu into 600Ω, Fs= 48 kHz, Less than 0.05% 20 Hz-40 kHz@+4 dBu into 600Ω, Fs= 96 kHz, INPUT to OUTPUT, Input Gain= Min.
Frequency response
- Frequency response
- +0.5, –1.5 dB 20 Hz-20 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 48 kHz / +0.5, –1.5 dB 20 Hz-40 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 96 kHz
Dynamic range
- Dynamic range
- 112 dB typ., DA Converter, 108 dB typ., INPUT to OUTPUT, Input Gain= Min.
Hum & noise level
- Equivalent input noise
- –128 dBu typ., Input Gain= Max.
- Residual output noise
- –88 dBu, ST master off
Crosstalk
- Crosstalk
- -100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB, @1 kHz *Measured with a 30dB/octave filter @22kHz
Power requirements
- Power requirements
- 100-240V, 50/60Hz
Power consumption
- Power consumption
- 72W
Dimensions
- W
- 480 mm (18.9")
- H
- 132 mm (5.2")
- D
- 368 mm (14.5")
Net weight
- Net weight
- 9.6 kg (21.2 lbs)
Accessories
- Accessories
- Owner’s Manual, AC power cord (250cm)
Others
- Others
- NC Value: FAN MODE LOW: NC=15 / HIGH: NC=25 (Measurement position: 1 m from the front of the unit), Operating temperature range: 0 - 40°C, Storage temperature range: –20 - 60°C
