Truss Genius

EVT25C-ALC

EVT25C-ALC How to attach EVT25C-ALC to Trussing, Tube, or Pipe 1. Release the Nylon-Insert Locknut by turning it counterclockwise to release the bolt and open the collar. 2. Place the EVT25C-ALC on the Truss, Tube, or Pipe and close the collar. 3. Put the bolt back in place with the washer and nylon-insert locknut above the collar. 4. Make sure the EVT25C-ALC is located in its proper place on the Truss, Tube, or Pipe before tightening the nylon-insert locknut. 5. Turn the nylon-insert locknut clockwise to tighten and secure the EVT25C-ALC into place. Do not exceed the load capacity of the EVT25C-ALC or Truss System. The EVT25C-ALC should be fully inspected before use. In the occurrence of any damage or defect, the EVT25C-ALC should not be used. The use of safety cables is recommended for maximum security. The purchase of this product in no way shall be conceived as authorizing or approving a specific installation or usage of the clamp. A licensed professional engineer shall review all structures, lighting plots, or other clamp uses. EVT25C-ALC Specifications: 304-Stainless Steel Hardware M6 (10mm Long) Attachment Flanged Button-Head Cap Screw Nylon-Insert Locknut M8 Made of the Highest Quality 6061-T6 Alloy Aluminum. Disclaimer and Guidance Statement: The purchase of any product shall not be construed as authorizing or approving a specific installation or usage. A licensed professional engineer shall review all structures, lighting plots, or any other product uses. While exhaustive efforts have been undertaken to ensure the precision of this information, Truss Genius Worldwide, LLC hereby disclaims any and all liability for errors. These drawings are intended solely for the purpose of providing guidance and should not be construed as definitive representations. Shop with Confidence at Truss Genius - Your Trusted Truss Source At Truss Genius, we are dedicated to providing our customers with the highest level of customer service and support. Our team of highly-trained

Product code

EVT25C-ALC

Category

Rigging & Staging