QNAP
GM-1001
The GM-1000 series features a unique dual-NAS architecture that delivers cost-efficient and space-saving advantages. It contains two replaceable TNS-h1083X NAS nodes, which are powered by Intel® Xeon® E processors and provide high-performance 10GbE / 2.5GbE connectivity and expandable I/O. M.2 and U.2 SSD interfaces are also included to enable cache acceleration for tackling the performance wall in bandwidth-demanding and low-latency business applications (such as intensive backup and virtualization). Both TNS-h1083X NAS nodes use the ZFS-based QuTS hero operating system that supports block-level inline data deduplication and compression, near-limitless snapshots, real-time SnapSync, and more business-oriented features to achieve reliable service-level agreement performance.
- Product code
- GM-1001
- Category
- IT & Network
- Family
- GM-1000
- Weight
- 25.21 kg
- Power
- 169.68 W
Specifications
Hardware
- CPU
- Intel® Xeon® E-2234 4-core/8-thread processor, up to 4.8 GHz
- CPU Architecture
- 64-bit x86
- Encryption Engine
- (AES-NI)
- System Memory
- 8 GB UDIMM DDR4 per node
- Maximum Memory
- 128 GB (4 x 32 GB) per node
- Memory Slot
- 4 x UDIMM DDR4 per node
- Flash Memory
- 5GB (Dual boot OS protection)
- Drive Bay
- 8 x 3.5-inch + 2 x 2.5-inch per node The system is shipped without HDD/SSD. For the HDD/SSD compatibility list, please visit https://www.qnap.com/compatibility/
- Drive Compatibility
- 3.5-inch bays: 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives 2.5-inch bays: 2.5-inch SATA solid state drives 2.5-inch U.2 Gen3 x4 solid state drives
- Hot-swappable
- (Not supported M.2 SSD)
- M.2 Slot
- 2 x M.2 2280 NVMe Gen3 x2 slots per node Compatible with NVMe SSD PCIe Gen 3 and above. Please refer to https://www.qnap.com/compatibility/ for compatibility.
- 2.5 Gigabit Ethernet Port (2.5G/1G/100M)
- 2 per node (2.5G/1G/100M/10M)
- 10 Gigabit Ethernet Port
- 2 x 10GbE SFP+ SmartNIC (Mellanox ConnectX®-4 Lx EN)
- PCIe Slot
- 2 per node Slot 1: PCIe Gen3 x4 (PCH) Slot 2: PCIe Gen3 x8 (CPU)
- USB 3.2 Gen 2 (10Gbps) Port
- 4 x Type-A per node
- Form Factor
- 3U Rackmount
- LED Indicators
- HDD, SSD, Status, Power, Fan, Temperaure, Node ID
- Buttons
- Power, Reset, OLED
- Dimensions (HxWxD)
- 132.1 × 481.7 × 623.4 mm
- Weight (Net)
- 25.21 kg
- Weight (Gross)
- 34.45 kg
- Operating Temperature
- 0 - 40 °C (32°F - 104°F)
- Storage Temperature
- -20 - 70°C (-4°F - 158°F)
- Relative Humidity
- 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
- Power Supply Unit
- 770W(x2), 100-240V
- Power Consumption: Disk Standby Mode
- 169.68 W
- Power Consumption: Operating Mode, Typical
- 201.07 W Tested with drives fully populated.
- Fan
- 3 x 60mm, 12VDC per node
- System Warning
- Buzzer
- Standard Warranty
- 3 years
- Max. Number of Concurrent Connections (CIFS) - with Max. Memory
- 10000
- Status
- Legacy
