QNAP
ES1686Adc-2142IT-128G
Downtime and forklift upgrades are the two costs that enterprise storage budgets rarely account for. The ES1686Adc is a 3U 16-bay high availability (HA) storage array built to remove both. Two Active-Active controllers process I/O simultaneously and take over for one another transparently, keeping SMB/NFS file services and iSCSI / Fibre Channel block services online through component failure and planned maintenance. At the same time, a hybrid backplane lets every one of the 16 bays accept either SAS 12Gb/s or U.3 PCIe NVMe drives — so you can deploy SAS capacity at a low cost per TB today, and adopt NVMe SSDs whenever your workloads demand PCIe Gen4 performance, without replacing the storage platform, the operating system, or the way your team manages it.• Dual controllers, each with an Intel® Xeon® D 8-core processor• Supports 16 x 3.5-inch SAS SSD/HDD or 2.5-inch U.3 NVMe dual-port SSD• Four built-in 10GbE SFP+ ports with 25GbE expansion support• Powered by the QES operating system (ZFS file system) for high IOPS and petabyte-scale storage capacity
- Product code
- ES1686Adc-2142IT-128G
- Category
- IT & Network
- Family
- ES1686ADC
- Weight
- 23.82 kg
- Power
- 588.33 W
Specifications
Hardware
- Number of Controller Module
- 2
- CPU
- Intel® Xeon® D-2142IT 8-core 1.90 GHz processor (burst up to 3.0 GHz) per controller
- CPU Architecture
- 64-bit x86
- Encryption Engine
- (AES-NI)
- System Memory
- 64 GB RDIMM DDR4 ECC per controller
- Maximum Memory
- 1024GB (16 x 64GB) 512 GB (8 x 64GB) per controller
- Memory Slot
- 16 x R-DIMM/LR-DIMM DDR4 8 x R-DIMM/LR-DIMM DDR4 per controller IMPORTANT: You can only use one type of dual in-line memory module (DIMM) at a time. Do not use Registered DIMM (RDIMM) with Load Reduced DIMM (LRDIMM) memory.
- Flash Memory
- 4GB (Dual boot OS protection)
- Drive Bay
- 16 x 3.5-inch SAS 12Gb/s, backward-compatible to SAS 6Gb/s
- Drive Compatibility
- 3.5-inch bays: 3.5-inch SAS hard disk drives 2.5-inch SAS hard disk drives 2.5-inch SAS solid state drives 2.5-inch bays: 2.5-inch U.2/SATA SSD 2.5-inch dual-port U.3 NVMe SSD
- SSD Cache Acceleration Support
- L1 ARC Read Cache: RAM L2 ARC Read Cache: SSD ZIL Write Cache: NVRAM (C2F)
- Cache for Copy To Flash (C2F)
- 1 per each controller (64GB M.2 SSD)
- 2.5 Gigabit Ethernet Port (2.5G/1G/100M)
- 3 for each controller (assign one for remote management)
- 10 Gigabit Ethernet Port
- 4 x 10GbE SFP+ for each controller
- PCIe Slot
- 2 per controller Slot 1: PCIe Gen 3 x8 (CPU) Slot 2: PCIe Gen 3 x8 (CPU) Card dimensions for PCIe slot 1~Slot 2：215 x 68.9 x 18.76 mm / 8.46 x 2.71 x 0.74 inches. Wider cards can be installed if the next PCIe slot will not be used.
- USB 3.2 Gen 1 port
- 2 per each controller Note: The USB ports are for engineering purpose only. No external devices such as storage drives or UPS are supported.
- Form Factor
- 3U Rackmount
- LED Indicators
- System Power LED (Green): on/off System Status (Green/ Red): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged LCD Status Display (Two-digit number): Status of JBOD connection
- Buttons
- Power, Reset
- Dimensions (HxWxD)
- 132 × 446.2 × 587.75 mm
- Weight (Net)
- 23.82 kg
- Weight (Gross)
- 34.63 kg
- Operating Temperature
- 0 - 40 °C (32°F - 104°F)
- Storage Temperature
- -20 - 70°C (-4°F - 158°F)
- Relative Humidity
- 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
- Power Supply Unit
- Redundant/ Hot Swap Power Vin:90~264VAC;700W
- Power Consumption: Operating Mode, Typical
- 588.33 W Tested with drives fully populated.
- Fan
- Hot-swappable fan module (60*60*38mm; 16000RPM/12v/2.8A x 3)
- System Warning
- Buzzer
- Standard Warranty
- 5 Backup Battery Unit (BBU) carries a 1-year warranty.
- Max. Number of Concurrent Connections (CIFS) - with Max. Memory
- 10000
- Safety Standard
- FCC Class A (USA only) CE Mark ( EN55022 Class A, EN55024) EN60950 BSMI VCCI CB LVD
