QNAP
QNAP
EJ1600
QNAP designs and delivers high-quality network attached storage (NAS) and professional network video recorder (NVR) solutions to users from home, SOHO to small, medium businesses.
- Product code
- EJ1600
- Category
- IT & Network
- Family
- EJ1600
- Weight
- 29.2 kg
- Power
- 344.19 W
Specifications
Hardware
- JBOD Connection Interface
- SAS
- Drive Bay
- 16 x 3.5-inch The system is shipped without HDD. For the HDD compatibility list, please visit https://www.qnap.com/compatibility/
- Drive Compatibility
- 3.5-inch bays: 3.5-inch SAS 12Gb/s, 6Gb/s hard disk drives 3.5-inch SATA 6Gb/s, 3Gb/s hard disk drives 2.5-inch SATA 6Gb/s, 3Gb/s solid state drives You can only use one disk type (HDD or SSD) in a RAID group. Combining different types of disk in one RAID group is not supported.
- Form Factor
- 3U Rackmount
- Host Interface
- Two SAS (one input, one output) 6Gbps for each controller, 4x port
- LED Indicators
- System Power LED (Green): on/off System Status (Green/ Orange): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged LCD Status Display (Two-digit number): Status of JBOD connection
- Buttons
- Power / Reset
- Dimensions (HxWxD)
- 132 × 446.2 × 618 mm Excludes ear hook and the protruding part of the Power Supply Unit.
- Weight (Net)
- 29.2 kg
- Weight (Gross)
- 33.8 kg
- Operating Temperature
- 0 - 40 °C (32°F - 104°F)
- Storage Temperature
- -20 - 70°C (-4°F - 158°F)
- Relative Humidity
- 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
- Power Supply Unit
- Redundant/ Hot Swap ATX Power Supply, 450W, 90-240Vac~, 50-60Hz
- Power Consumption: Operating Mode, Typical
- 344.19 W Tested with drives fully populated.
- Fan
- Hot-swappable fan module (60*60*38mm; 16000RPM/12v/2.8A x 3)
- System Warning
- Buzzer
- Standard Warranty
- 5
- Management
- The functions listed below are managed via the QNAP QES operating system. Support for hard disk’s S.M.A.R.T. capacity RAID expansion enclosure LED identifier Location indication of RAID expansion enclosure Location indication of hard disks on RAID expansion enclosure Smart fan control In-band firmware update The disks, RAID Groups, storage pools, and volumes in the RAID expansion enclosures are configured via the QES operating system. Upto 1PB Single Volume Support for multiple RAID groups in a storage pool to ensure data safety Online storage pool expansion Online volume expansion Block-based iSCSI LUN Support for thin-provisioned volume with space reclamation Support for thin-provisioned iSCSI LUN with space reclamation
- Status
- Legacy
