Pharos
Pharos VLC+

Pharos

Pharos VLC+

The Pharos Designer VLC+ (Video Lighting Controller+) is designed to control the world’s largest HD video and lighting façade projects. The VLC+ M is supported in Pharos Designer 2.15 or later. The VLC+ is supported in Pharos Designer 2.6 or later. Playback two full HD videos, while seamlessly crossfading into two further videos Wrap video content…

Product code
VLC+
Category
Lighting
Family
controllers
Rack units
1U

Specifications

Output

DMX512
Pharos Gateways EDN and RIO G4 , or any eDMX node
RDM
Not available on VLC family controllers
sACN
ANSI E1.31 (with per fixture priority) standard
Art-Net
Art-Net I, Art-Net II, Art-Net 3, Art-Net 4 (transmit only). Configurable broadcast override
KiNET
KiNET V1, V2, V3; PDS/Data Enabler discovery
Pathport
Pathway Connectivity protocol
EDN
Via EDN : natively integrate, and output DMX, with the EDN
SPI
Via EDN + SDI : synchronous and asynchronous serial data output
Video Out
Display port for video-mapped fixtures (VLC+ M); DVI-I output for video-mapped fixtures (VLC+)
Audio Out
Audio Output with two audio layers; a background layer for ongoing audio, and an alert layer for high-priority overriding
Simultaneous
Multiple protocols can be in operation simultaneously
Capacity
Limited by patched channels, not universes used
Scalable
Synchronises with up to 40 Pharos Designer Controllers over network

Triggering & Integration

Startup
Commences programmed playback automatically on receiving power
Clock
Battery-backed real-time clock for calendar and time-based triggers
Astronomical
Sunrise/Sunset/Twilight and Lunar phases
Ethernet
UDP, TCP, Multicast; send/receive any Ethernet message
RS232 Serial
Configurable port; send/receive free syntax in ASCII, HEX or decimal
RS485 Serial
Via RIO : configurable port; send/receive free syntax in ASCII, HEX or decimal
eDMX
sACN or Art-Net
Inputs
Via RIO : contact closure, active low, active high or 0-24V analog level
Outputs
Via RIO : isolated relay outputs (48V, 250mA)
MIDI
Via RIO A : MIDI Notes, SysEx or MIDI Time Code
Timecode
Linear Timecode (SMPTE, Film, EBU, NTSC) (VLC+ M); Via RIO A : Linear Timecode (SMPTE, Film, EBU, NTSC) (VLC+)
Audio Level
Via RIO A : stereo 30-band spectrum analysis
DALI
Via RIO D4 : transmit and receive DALI commands
Web Interface
Built-in or custom designed
Wall Stations
Integrate with BPS , TPS 5 or TPS 8
Conditions
Full conditional logic support
Scripting
Lua scripting for total flexibility
IO Modules
Supports our extensive IO Module library for easy integration
Scalable
Supports Pharos Designer Remote Devices

Interfaces

Ethernet
Network port for device access and management; Neutrik etherCON (RJ45 compatible) for 10/100/1000Base-TX Ethernet; Static IP or DHCP
eDMX
Two dedicated Ethernet ports for lighting data; Neutrik etherCON (RJ45 compatible) for 10/100/1000Base-TX Ethernet; Static IP or DHCP
Serial
RS232 * (VLC+ M); RS232 via DB9 connector (VLC+)
USB
Two USB 2.0 Type A ports (for future development)
Audio Output
Stereo balanced line level analog port * / SPDIF (RCA) port (VLC+ M); Stereo analogue & digital audio ports with RCA connectors (VLC+)
Audio Input
Stereo balanced line level analog port * (VLC+ M)
Video Output
Display port for monitoring or video-mapped fixtures (VLC+ M); DVI-I output for monitoring or video-mapped fixtures (VLC+)
Video Input
HDMI live video input to capture resolutions up to 1080p60 (VLC+ M); DVI-D live video input to capture resolutions up to 1080p60 (VLC+)
Certifications
CE compliant, UKCA compliant, ETL/cETL listed, may be used as part of a Title 24 compliant lighting control system
Power
100-240V AC, 50-60Hz, 0.4-0.2A; 40W typical (100W maximum); IEC connector with switch (power cable not supplied)
Configuration
Pharos Designer 2.15 or later (VLC+ M); Pharos Designer 2.6 or later (VLC+)
Data Storage
Internal 128GB SSD (supplied) (VLC+ M); Internal 512GB SSD (supplied) (VLC+)
Temperature
0°C to 50°C (32°F to 122°F)
Humidity
10-90% relative, non-condensing (VLC+ M); 10-50% relative, non-condensing (VLC+)
Ingress
IP20
Physical (VLC+ M)
19″ Rack unit, 1U, 13.5″ deep; 48.3 x 34.3 x 4.5 cm (19 x 13.5 x 1.8 in); 3.5 kg (7.7 lbs)
Physical (VLC+)
19″ Rack unit, 2U, 16″ deep; 48.3 x 40.6 x 8.9 cm (19 x 16 x 3.5 in); 7.6 kg (16.8 lbs)
Shipping (VLC+ M)
57 x 45 x 17 cm (22 x 18 x 7 in); 5.5 kg (12 lbs)
Shipping (VLC+)
55 x 52 x 22 cm (21.5 x 20.5 x 8.5 in); 10.0 kg (22 lbs)
Recovery
Hardware watchdog and recessed reset button
Warranty
5 years

Specification from Pharos