Pharos
Pharos
Pharos SDI
The Pharos Designer SDI (Serial Data Interface) is an accessory to the Pharos Designer EDN (Ethernet Data Node) and RIO G4 (Remote Gateway 4-Port) providing a powerful solution for converting DMX data to a variety of serial protocols for controlling products such as addressable LED tape. The SDI with EDN is supported with Pharos Designer controllers…
- Product code
- SDI
- Category
- Lighting
- Family
- accessories
Specifications
Interfaces
- Serial In
- RS485 connector to EDN / RIO G4 *
- Serial Out
- 3-pin AD and SC/SD connectors *; (Asynchronous Data, Synchronous Clock, Synchronous Data)
Protocols
- SDI Protocols
- APA102; APA104; GS8208; LPD6803; MBI6023; SK6812; SK9822; UCS1903; UCS1912; UCS2903; UCS2904; UCS2912; UCS8903; UCS8904; WS2801; WS2811; WS2812; WS2813
- Certifications
- CE compliant, UKCA compliant, ETL/cETL listed
- Power
- 5-28V DC *, 0.3W typical (0.6W maximum)
- Required
- Any Pharos Designer Controller with Pharos Designer EDN or Pharos RIO G4
- Configuration
- Pharos Designer 2.8 or later (EDN); Pharos Designer 2.13 or later (RIO G4)
- Temperature
- 0°C to 50°C (32°F to 122°F)
- Humidity
- 10-50% relative, non-condensing
- Ingress
- IP40
- Isolation
- 1kV
- Physical
- 2 unit wide DIN-rail mounting enclosure (35/7.5 rail); 3.6 x 9 x 3.6 cm (1.4 x 3.5 x 1.4 in); 0.05kg (0.11 lb)
- Shipping
- 25 x 23 x 5.5 cm (9.8 x 9.1 x 2.2 in); 0.85 kg (1.87 lbs); (pack of 10)
- Warranty
- 5 years
