Pharos
Pharos
Pharos RIO A
The Pharos Designer RIO A (Remote Input Output Audio) device provides a convenient and scalable way to add audio integration to your Pharos Designer system. The RIO A is supported with Pharos Designer controllers running v2.8 or later. Pharos Designer Remote Devices can be used with the full range of Pharos Designer Controllers, providing additional…
- Product code
- RIO-A
- Category
- Lighting
- Family
- remote-devices
Specifications
Capabilities
- Audio In
- Volume level and up to 30 band spectrum analysis per channel, including peak decay rate control and manual or automatic gain; Maximum four audio inputs per system
- Timecode
- Timecode support via MIDI (MTC) or either audio channel (LTC); User configurable fly-wheel, error correction routines and jump support; Maximum 12 Timecode inputs per system
- Linear Timecode (LTC)
- Format auto-detection with support for 24fps (film), 25fps (EBU), 29.97fps (NTSC) & 30fps (SMPTE)
- MIDI
- Input and Output of freely configurable Short messages (Notes), MIDI Show Control or Extended Messages using convenient message composer or MIDI Time Code (MTC) input
Interfaces
- Ethernet
- RJ45 socket for 10/100Base-TX Ethernet with Link/Data LEDs; Fixed IP or DHCP; Power-over-Ethernet (PoE)
- Audio In
- Stereo balanced line level (0dBV) *
- MIDI In & Out
- Standard 5-pin DIN
System Limits
- In Project
- Maximum 200 remote devices across multiple controllers in a single Pharos Designer project.
- Per Controller
- Maximum remote device limits assigned to controllers depend on controller type:; 64 for each LPC , TPC; 100 for each LPC X , VLC , VLC+
- Certifications
- CE compliant, UKCA compliant, ETL/cETL listed
- Power
- PoE (IEEE802.3af, Class 1), 1.5W typical
- Required
- Any Pharos Designer Controller
- Configuration
- Pharos Designer 2.8 or later
- Addressing
- By rotary selector switch
- Temperature
- 0°C to 50°C (32°F to 122°F)
- Humidity
- 10-50% relative, non-condensing
- Ingress
- IP40
- Physical
- 4 unit wide DIN rail mounting enclosure (DIN43880 / EN60715 (35/7.5 rail)); 7.2 x 9 x 5.8 cm (2.8 x 3.5 x 2.3 in); 0.3 kg (0.7 lbs)
- Shipping
- 20 x 15 x 12 cm (8 x 6 x 5 in); 0.5 kg (1.1 lbs)
- Recovery
- Hardware watchdog and recessed reset button
- Warranty
- 5 years
