Pharos

Pharos RIO

The Pharos RIO 84 adds 8 inputs, 4 relay outputs and a multi-protocol serial port to any Pharos Designer system for show control and integration.

Specifications

Contact Closure: Connect an external volt-free switch between input and ground (internal 2.2kohm pull-up to 5V)
Digital In: Connect an external DC voltage source between input and ground (24V maximum; internal 2MOhm pull-down to 0V); software-configurable low/high threshold
Analog In: Connect an external DC voltage source between input and ground (24V maximum); software-configurable range
Relay Outs: Individually isolated (1KV) relay outputs (48V 250mA)
Serial Data: RS232, RS485; configurable port; send/receive free syntax in ASCII, HEX or decimal
DMX Out: 512 channels (USITT E1.11-2008)

Ethernet: RJ45 socket for 10/100Base-TX Ethernet with Link/Data LEDs; Fixed IP or DHCP; Power-over-Ethernet (PoE)
Serial: RS232 / RS485 / DMX *
Inputs: Individually selectable operating mode for contact closure, digital or analog input (24V maximum) *
Relay Outs: Individually isolated (1KV) solid-state relay outputs rated at 48V 0.25A (AC/DC) *; An external PSU is required to power the relay outputs

In Project: Maximum 200 remote devices across multiple controllers in a single Pharos Designer project.
Per Controller: Maximum remote device limits assigned to controllers depend on controller type:; 64 for each LPC , TPC; 100 for each LPC X , VLC , VLC+

Certifications: CE compliant, UKCA compliant, ETL/cETL listed
Power: PoE (IEEE802.3af, Class 1), 1.5W typical
Required: Any Pharos Designer Controller
Configuration: Pharos Designer 2.16 or later
Addressing: By rotary selector switch
Temperature: 0°C to 50°C (32°F to 122°F)
Humidity: 10-90% relative, non-condensing
Ingress: IP40
Physical: 6 unit wide DIN rail mounting enclosure (35/7.5 rail); 10.8 x 9 x 4 cm (4.2 x 3.5 x 1.6 in); 0.2 kg (0.5 lbs)
Shipping: 19.5 x 15 x 7.5 cm (8 x 6 x 3 in); 0.4 kg (0.9 lbs)
Recovery: Hardware watchdog and recessed reset button
Warranty: 5 years