Pharos
Pharos
Pharos EXT
A product change notification applies to this product, click here to read more The Pharos Designer EXT is an extension for the Pharos Designer TPC and together they form a standalone, mains-powered lighting controller with versatile output and show control options. The EXT adds physical connectivity to the TPC: PoE power, local DMX and DALI ports, RS232 serial…
- Product code
- EXT
- Category
- Lighting
- Family
- accessories
Specifications
Capabilities
- Contact Closure
- Connect an external volt-free switch between input and ground (internal 2.2k pull-up to 5V)
- Digital In
- Connect an external voltage source between input and ground (24V maximum; internal 2MOhm pull-down to 0V); software-configurable low/high threshold
- Analog In
- Connect an external voltage source between input and ground (24V maximum); software-configurable range
- Serial Data
- RS232; configurable port; send/receive free syntax in ASCII, HEX or decimal
- DALI Control
- Control for up to 64 DALI devices including device discovery and configuration
- DALI Receive
- Receive DALI messages from other controllers such as wall panels or occupancy sensors
- Emergency Lighting
- Emergency Lighting Schedule automatic Function and Duration tests; automatic querying for battery level and lamp hours; test result and error reporting web page
- Bus Power Detection
- Detect and report bus power status, a separate DALI bus power supply is required
Interfaces
- TPC PoE
- RJ45 socket with Link/Data LEDs for direct connection to TPC only (100m max distance)
- Ethernet
- RJ45 socket for 10/100Base-TX Ethernet with Link/Data LEDs; Fixed IP or DHCP
- DMX512
- Isolated DMX port, RDM compatible *
- DALI
- Port can transmit and receive DALI commands *; Supports DALI standards: EN 62386-101:2009, EN 62386-102:2009, EN 62386-202:2009, EN 62386-209:2011
- Serial
- RS232 *
- Inputs
- Individually selectable operating mode for contact closure, digital or analog input (24V maximum) *
- Certifications
- CE compliant, UKCA compliant, ETL/cETL listed
- Power
- 100-240V AC *, 50-60Hz, 0.1A, 10W typical
- Required
- Pharos Designer TPC
- Configuration
- Pharos Designer 2
- Temperature
- 0°C to 50°C (32°F to 122°F)
- Humidity
- 10-50% relative, non-condensing
- Ingress
- IP40
- Physical
- 8 unit wide DIN rail mounting enclosure (DIN43880 / EN60715 (35/7.5 rail)); 14.4 x 9 x 5.8 cm (5.7 x 3.5 x 2.3 in); 0.5 kg (1.1 lbs)
- Shipping
- 20 x 15 x 12 cm (8 x 6 x 5 in); 0.7 kg (1.6 lbs)
- Recovery
- Hardware watchdog and recessed reset button
- Warranty
- 5 years
