Panasonic

AW-RP60GJ

Compact and useful Remote Camera Controller with PoEs support for single cable connection.

Specifications

Power Requirements: 12 V DC (10.8 V to 13.2 V), 42 V to 57 V DC (PoE power supply)
Current Consumption: 0.9 A (XLR connector input), 0.3 A (PoE power supply)
Ambient Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
Allowable Humidity Ranges: 20 % to 90 % (no condensation)
Storage Temperature: -20 °C to 50 °C (-4 °F to 122 °F)
Mass: 1.5 kg (3.31 lbs)
Dimensions (W x H x D): W 210 mm x H 92 mm x D 177 mm (8-9/32 inches x 3-5/8 inches x 6-31/32 inches) (excluding protrusions)

Input/Output: DC 12 V IN XLR 4‑pin
LAN (RJ-45) (with LED): 10BASE‑T/100BASE-TX, PoE input Connecting cable: LAN cable, max. 100 m (328 ft) • When connecting the unit via a switching hub: Straight cable (category 5e), STP (Shielded Twisted Pair) cable recommended • When connecting the unit directly: Crossover cable (category 5e), STP (Shielded Twisted Pair) cable recommended • REMOTE: Available only for LAN (RJ45) control
SERIAL CONT (RJ-45): RS‑422 (control signals for remote cameras), TALLY OUT Connecting cable: Straight cable (category 5e), max. 1000 m (3280 ft) TALLY OUT: Open collector output (negative logic) Maximum voltage resistance DC 24 V, Maximum current 50 mA
TALLY/GPIO (D-sub 25-pin, female, inch thread): TALLY IN: Contact input (Status operation) GPIO IN: Contact input (Trigger operation) GPIO OUT: Open collector output (negative logic) Maximum voltage resistance DC 24 V, Maximum current 10 mA
LCD Display: 3.5 inch LCD (QHD: 960 x 540)
Connection Specifications: No. of Connectable Cameras 200 (IP), 5 (RS422)
Remote Camera Selection: 5 (6 to 200 controlled from the LCD)
No. of Camera Groups: 40 (5 units/group)
No. of Memory Presets: 100

Documents are hosted by the manufacturer; these are links to their files.