Panasonic
Panasonic
AW-RP150GJ
Intuitive Camera Control for Ease of Use and One-Person Operation.
- Product code
- AW-RP150GJ
- Category
- Video
- Family
- products
Specifications
General
- Power Requirements
- 12 V DC (10.8 V to 13.2 V), DC 42 V to 57 V (Camera Input, PoE+ power supply)
- Current Consumption
- 1.0 A (Connector Input), 0.6 A (PoE+ power supply)
- Ambient Operating Temperature
- 0 °C to 40 °C (32 °F to 104 °F)
- Allowable Humidity Ranges
- 10 % to 90 % (no condensation)
- Storage Temperature
- -20 °C to 50 °C (-4 °F to 122 °F)
- Mass
- Approx. 3.2 kg (7.05 lb)
- Dimensions (W x H x D)
- 342 mm x 178 mm x 245 mm (13-15/32 inches x 7 inches x 9-21/32 inches) (excluding protrusions)
Input/Output Connectors
- Input
- DC 12 V IN XLR 4‑pin
- 3G-SDI IN
- SMPTE424M/SMPTE292 / 75 Ω (BNC x 1) Supported formats: 1080/59.94p* 2 , 1080/50p* 3 , 1080/59.94i, 1080/50i, 1080/23.98p, 1080/25p, 1080/23.98PsF, 1080/25PsF
- Output
- 3G-SDI ACTIVE THRU OUT SMPTE292 / 75 Ω (BNC x 1)
- Input/Output
- IP CONT 100BASE‑TX PoE+ input Connection cable: LAN cable, max. 100 m (328 ft) • When connecting the unit via a switching hub: Straight cable or a cross cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended • When connecting the unit directly: Crossover cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended
- SERIAL CONT (RJ‑45)
- RS‑422 (control signals for remote cameras), TALLY OUT Connecting cable: Straight cable (category 5e or better shielded cable), max. 1000 m (3280 ft) TALLY OUT: Open collector output (negative logic) Maximum voltage resistance DC 24 V, Maximum current 50 mA
- TALLY/GPIO 1
- D‑sub 25‑pin, female, inch thread TALLY IN : 10 inputs (for receiving photocoupler signals) GPI : 6 inputs (for receiving photocoupler signals) GPIO : 5 inputs (for receiving photocoupler signals) or 5 outputs (open collector outputs, negative logic) • Input/output switched with menu settings
- GPIO 2
- D‑sub 25‑pin, female, inch thread GPI : 10 inputs (for receiving photocoupler signals) GPIO : 10 inputs (for receiving photocoupler signals) or 10 outputs (open collector outputs, negative logic) • Input/output switched with menu settings Reserve connectors: 2 connectors (For future expansion feature)
- LCD Display
- 7-inch Touch Panel GUI Monitor (WVGA(800×480))
- SD Memory Card Slot
- SDHC / SDXC Memory Card Slot x 1
Connection Specifications
- No. of Connectable Cameras
- 200 (IP), 5 (RS422)
- No. of Camera Selection Buttons
- 10
- No. of Camera Groups
- 20 (10 units per 1 group)
Memory
- Preset Memory
- No. of memory presets 100
- Tracing Memory
- No. of cameras Cam1 to Cam10
- Recording time, no. of memory settings
- Maximum 5 min. total per camera, maximum of 10 settings per camera
Other Functions
- No. of User Assignable Buttons
- 6 + up to 10 on the LCD menu
- Pan / Tilt Speed Adjustment
- 7 levels
- TALLY LED Display Color:
- green / red
Documents
Documents are hosted by the manufacturer; these are links to their files.
