Panasonic
Panasonic
AV-HS7300
Live video direction in environments where time is of the essence. 4K compatible Live Switcher.
- Product code
- AV-HS7300
- Category
- Video
- Family
- products
- Rack units
- 9U
- Weight
- 37 kg
- Power
- 460 W
Specifications
General
- Power Supply
- AC 100 V to 240 V, 50 Hz/60 Hz
- Power Consumption
- 460 W
- Ambient Operating Temperature
- 0 °C to 40 °C (32 °F to 104 °F)
- Ambient Operating Humidity
- 10 % to 90 % (no condensation)
- Dimensions (W x H x D)
- 482 mm x 399 mm x 420 mm (excluding protrusions), 9RU
- Weight
- Approx. 37 kg (when full option is installed, excluding accessories)
Video Terminal
- SDI IN 1 to SDI IN 72 Terminals
- During Standard mode Standard 36 lines • Connector: BNC x 36 Maximum 72 lines • Connector: BNC x 72
- HD-SDI
- HD serial digital, SMPTE292M (BTA S-004) standard compliant • 0.8 V [p-p] ± 10 % (75 Ω) • Automatic equalizer 100 m (when 1.5 Gbps/5C-FB cable is used)
- 3G-SDI
- 3G serial digital, SMPTE424M standard compliant • 0.8 V [p-p] ± 10 % (75 Ω) • Automatic equalizer 100 m (when 3 Gbps/5C-FB cable is used) • 3G‑SDI Level A, 3G‑SDI Level B
During 4K mode Standard 9 lines • Connector: BNC x 36 (construct one line of 4K signal with four terminals) Maximum 18 lines • Connector: BNC x 72 (construct one line of 4K signal with four terminals) • Can use the 4K signal in SQD format
- SDI OUT 1 to SDI OUT 42 Terminals
- During Standard mode Standard 14 lines (<SDI OUT 1> to <SDI OUT 4>: Two distribute output, <SDI OUT 5> to <SDI OUT 14>: One distribute output) • Connector: BNC x 18 Maximum 42 lines (<SDI OUT 1> to <SDI OUT 4>, <SDI OUT 15> to <SDI OUT 18>, <SDI OUT 29> to <SDI OUT 32>: Two distribute output, other: One distribute output) • Connector: BNC x 54 • ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, ME3PGM, ME3PVW, ME3CLN, ME3KEYPVW, ME4PGM, ME4PVW, ME4CLN, ME4KEYPVW, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, DSK3CLN, DSK4CLN, SEL KEYPVW, MV1 to MV4, AUX1 to AUX24 can be assigned
- HD-SDI
- HD serial digital, SMPTE292M (BTA S-004) standard compliant • Output level: 0.8 V [p-p] ± 10 % • Rise time: Less than 270 ps (HD) • Fall time: Less than 270 ps (HD) • Difference between rise time and fall time: 100 ps or less (HD) • Alignment jitter: 0.2 UI (130 ps) or less (HD) • Timing jitter: 1.0 UI or less (HD) • Eye aperture ratio: 90 % or more • DC offset: 0 ± 0.5 V
- 3G-SDI
- 3G serial digital, SMPTE424M standard compliant • Output level: 0.8 V [p-p] ± 10 % • Rise time: 135 ps or less • Fall time: 135 ps or less • Difference between rise time and fall time: 50 ps or less • Alignment jitter: 0.3 UI or less • Timing jitter: 2.0 UI or less • DC offset: 0 ± 0.5 V • 3G‑SDI Level B
During 4K mode Standard 3 lines (construct one line of 4K signal with four terminals) • <SDI OUT 1> to <SDI OUT 4>: One line x two distribute output, <SDI OUT 5> to <SDI OUT 12>: Two lines x one distribute output Maximum 9 lines (construct one line of 4K signal with four terminals) • <SDI OUT 1> to <SDI OUT 4>: One line x two distribute output, <SDI OUT 5> to <SDI OUT 12>: Two lines x one distribute output • <SDI OUT 15> to <SDI OUT 18>: One line x two distribute output, <SDI OUT 19> to <SDI OUT 26>: Two lines x one distribute output • <SDI OUT 29> to <SDI OUT 32>: One line x two distribute output, <SDI OUT 33> to <SDI OUT 40>: Two lines x one distribute output • The 4K signal in SQD format can be used. • ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, SEL KEYPVW, MV1, and AUX1 to AUX6 can be assigned
- Signal Formats
- 1080/59.94p, 1080/59.94i, 1080/50p, 1080/50i, 1080/29.97PsF, 1080/25PsF, 1080/23.98PsF, 2160/59.94p, 2160/50p
- Signal Processing
- Y:PB:P R 4:2:2 10 bit
- R:G:B
- 4:4:4 8 bit
- ME Number
- 4ME (Standard Mode) / 1.5ME (4K Mode)
Synchronous Terminal
- REF Terminal
- In Genlock mode: Black burst or Tri-level Sync input signals (with loop-through) • If the loop-through output is not used, provide a 75 Ω termination. • Connector: BNC • Same field frequencies as those of the system formats supported • Only the Genlock mode is supported for 1080/23.98PsF format • In the 1080/23.98PsF format, black burst signals with 10 Field ID (SMPTE318M standard compliant) or Tri-level Sync signals supported
- Video Delay Time
- During Standard mode
- 1 line (H)
- When the frame synchronizer is set to [Off]
- 2 field (V)
- When the frame synchronizer is set to [On]
Control Terminal
- LAN Terminal
- Compatible with 100BASE‑TX and AUTO-MDIX (For IP control) • Connection cable: LAN cable (CAT5e), max. 100 m, STP (Shielded Twisted Pair) cable recommended • Connector: RJ-45
- PANEL Terminal
- Compatible with 100BASE‑TX and AUTO-MDIX (For Control Panel AV‑HS60C2/AV‑HS60C4 connection) • Connection cable (supplied with AV‑HS60C2/AV‑HS60C4): LAN cable (CAT5e), straight cable, STP (Shielded Twisted Pair), 10 m • Connector: RJ-45
- COM1 (M) / COM2(M) / COM3 (M) Terminals
- RS-422 control terminal For master connection for controlling external devices • Connector: D-sub 9-pin (female) x 3, inch screw
- COM4 (M/S) Terminal
- RS-422 control terminal For master/slave connection for controlling external devices • Connector: D-sub 9-pin (female), inch screw • Switchable between master connection and slave connection by the menu
- GPI IN Terminal
- GPI IN: 18 inputs, general-purpose, photocoupler sensing ALARM OUT: 1 output, open collector output (negative logic) • Connector: D-sub 25-pin (female), inch screw
- GPI OUT1 / GPI OUT2 terminal
- GPI OUT: 48 outputs, selected from general purpose, tally Open collector output • Connector: D-sub 25-pin (female) x 2, inch screw
Documents
Documents are hosted by the manufacturer; these are links to their files.
