Panasonic

AV-HS6000

2ME Live Switcher with complete system adaptability, intuitive operations, high reliability, and advanced 4K compatibility.

Specifications

Power Supply: AC 100 V to 240 V, 50 Hz/60 Hz (AV-HS60U2 supports redundant power supply)
Power Consumption: 110 W
Ambient Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
Ambient Operating Humidity: 10 % to 90 % (no condensation)
Storage Temperature: 0 °C to 40 °C (32 °F to 104 °F)
Storage Humidity: 10 % to 90 % (no condensation)
Weight: Approx. 13.5 kg (29.7 lbs.) (excluding accessories)
Dimensions (W x H x D): 482 mm x 399 mm x 418 mm (18-31/32 inches x 5-3/16 inches x 16-15/32 inches) (excluding protrusions)

SDI IN 1 to SDI IN 32 Terminals: During Standard mode Standard 32 lines • Connector: BNC x 32 • SDI IN 27, SDI IN 28, SDI IN 21, SDI IN 32、SDI IN 32 terminals are equipped with up-converters, • SDI IN 25 to SDI IN 32 terminals are equipped with color correctors.
HD-SDI: SEMPTE 292M (BTQ-004) standard compliant • 0.8 V [p-p] ± 10 % (75 Ω) • Automatic equalizer 100 m (328 ft) (when 1.5 Gbps/5C-FB cable is used)
SD-SDI: SEMPTE 259M standard compliant • 0.8 V [p-p] ± 10 % (75 Ω) • Automatic equalizer 200 m (656 ft) (when 5C-2V cable is used)

3G-SDI: 3G serial digital, SMPTE424M standard compliant • 0.8 V [p-p] ± 10 % (75 Ω) • Automatic equalizer 100 m (328 ft) (when 3 Gbps/5C-FB cable is used) • 3G-SDI Level B 3G-SDI Level A (FS ON)
DVI-D IN 1 to DVI-D IN 2 Terminals: 2 lines Digital RGB: XGA (1024 x 768), WXGA (1280ｘ768), SXGA (1280ｘ1024), WSXGA+(1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200) Vertical frequency: 60 Hz Video format inputs: 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 720/59.94p, 720/50p • Connectors: DVI-D x 2 • The terminals do not support HDCP. • The DVI-I connector cable cannot be used. • For the DVI-D connector cable, use a cable with a length of up to 5 m. (16.4 ft) • <DVI-D IN1>/<DVI-D IN2> terminals cannot be used during 3G mode and 4K mode
SDI-D OUT 1 to SDI OUT 16 Terminals: During Standard mode 16 lines (2 distributed outputs per line) • Connectors: BNC x 32 • ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLM, ME2KEYPVW, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, DSK3CLN, DSK4CLN, SEL KEYPVW, MV1 to MV4, and AUX1 to AUX16 can be assigned.
HD-SDI: SMPTE292M (BTQ S-004) standard compliant • Output level: 0.8 V [p-p] ± 10 %
SD-SDI: SMPTE259M standard compliant • Output level: 0.8 V [p-p] ± 10 %

3G-SDI: 3G serial digital, SMPTE424M standard compliant • Output level: 0.8 V [p-p] ± 10 % • 3G-SDI Level B Mapping
Signal Formats: SD 480/59.94i, 576/50i
HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF, 1080/23.98PsF, 1080/25PsF, 1080/29.97PsF,
3G: 1080/59.94p, 1080/50p <Level B>
4K: 2160/59.94p, 2160/50p (SQD)
Signal Processing: Y:P B :P R 4:2:2 10 bit
R:G:B: 4:4:4 8 bit
ME Number: 2 ME

REF Terminal: • Connectors: BNC • Same field frequencies as those of the system formats supported In Genlock mode: Black burst or Tri-level Sync input signals (with loop-through) • If the loop-through output is not used, provide a 75 Ω termination • In the 1080/24PsF and1080/23.98PsF formats, only Genlock mode supported • In the 1080/23.98PsF format, black burst signals with10 Field ID (SMPTE318M standard compliant) or Try-level with 10 Sync signals supported • In the 1080/24PsF format, Tri-level Sync signals supported In internal sync mode: Black burst output signal x 2
LTC IN Terminal: This is the LTC (linear time code) input terminal. • Connector: BNC • Impedance: 1 kΩ • Level: 1 to 2 V [p-p]
Video Delay Time: During Standard mode
1 line (H): When the frame synchronizer is set to "Off" and the up-converter is set to "Off"
2 field (V): When the frame synchronizer is set to "On" and the up-converter is set to "On"

LAN Terminal: Compatible with 100Base-TX and AUTO-MDIX (For IP control) • Connection cable: LAN cable (CAT5e), max. 100 m (328 ft), STP (Shielded Twisted Pair) cable recommended • Connector: RJ-45
PANEL Terminal: Compatible with 100BASE-TX and AUTO-MDIX (For Control Panel AV-HS60C2/AV-HS60C4 connection) • Connection cable (supplied with AV-HS60C2/AV-HS60C4): LAN cable (CAT5e), straight cable, STP (Shielded Twisted Pair), 10 m (32.8 ft) • Connector: RJ-45
COM1 (M)/COM2 (M)/ COM3 (M) Terminals: RS-422 Control Terminal For master connection for controlling external devices • Connector: D-sub 9-pin (female) x 3, inch screw
COM4 (M/S) Terminal: RS-422 Control Terminal For master/slave connection for controlling external devices • Connector: D-sub 9-pin (female), inch screw • Switchable between master connection and slave connection via menu
GPI IN Terminal: GPI IN: 18 inputs, general-purpose, photocoupler sensing ALARM OUT: 1 output, open collector output (negative logic) • Connector: D-sub 25-pin (female), inch screw
GPI OUT 1/ GPI OUT 2 Terminal: GPI OUT: 48 outputs, selected from general purpose, tally Open collector output • Connector: D-sub 25-pin (female) x 2, inch screw

Documents are hosted by the manufacturer; these are links to their files.