Meyer Sound
Meyer Sound
ULTRA-X80
- Product code
- ULTRA-X80
- Category
- Audio
- Family
- ultra-x80
- Weight
- 62.6 kg
- Power
- 900 W
Specifications
ACOUSTICAL
- Operating Frequency Range
- 55 Hz - 18 kHz, ±6 dB
- AES75 Maximum Linear Sound Levels
- 122 dBZ, 140 dBZpk, 119.6 dBA, with an RMS input level of +3.0 dBV, 50º C
COVERAGE
- Horizontal Coverage
- 95°
- Vertical Coverage
- 40°
TRANSDUCERS
- Low Frequency
- Two 12-inch long-excursion cone drivers
- High Frequency
- One 4-inch diaphragm compression driver connected to a rotatable horn
PHYSICAL
- Weight
- 62.6 kg (138 lb)
- Enclosure
- Premium multi-ply birch, slightly textured black finish. The Outdoor Temporary (OT) version includes additional treatment of the cabinet wood.
- Protective Grille
- Powder-coated, stamped steel. The OT version also includes stainless steel mesh behind the grille.
- Rigging
- M8 x 1.25 mm accessory attachment points, six on bottom, six on top
- IEC Ingress Protection Rating (IP Rating)
- The OT version is IP55 rated, when connected to cables terminated with Neutrik TOP connectors
AC POWER
- Connector
- Neutrik powerCON TRUE1 TOP (True Outdoor Protection)
- Operating Voltage Range
- 200 – 240 V AC, 50 or 60 Hz
POWER CONSUMPTION
- Max Long-Term Continuous Power (>10 sec)
- 900 W
- Burst Power (<1 sec)
- 2400 W
- Idle Power
- 55 W
ANALOG AUDIO INPUT
- Connector
- Neutrik XLR 3-pin TOP (True Outdoor Protection) female input with male loop output.
- Input Level
- Source must be capable of producing +24 dBU into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
DIGITAL AUDIO INPUT
- Connector
- Neutrik etherCON TOP (True Outdoor Protection)
- Digital Format
- AVB, Milan Certified
MONITORING
- Telemetry
- Loudspeaker telemetry transmitted via the Ethernet port, displayed in software
