Meyer Sound
Meyer Sound
MPS-482HP
- Product code
- MPS-482HP
- Category
- Audio
- Family
- mps-482hp
- Rack units
- 1U
- Weight
- 2 kg
Specifications
FRONT PANEL
- LEDs per channel
- Two blue LEDs to indicate presence of output voltage Two green LEDs to indicate load current status Two red LEDs to indicate blown or open fuse
- Fuse
- Use only Meyer Sound PN 420.041 when replacing
REAR PANEL
- Audio Input
- Two XLR 3-pin female connectors OR one 6-pin male Phoenix connector (not summing to the XLR inputs) One Link Switch. Sends signal from channel 1 input to both output channels
- Channel Output
- Two Phoenix 5-pin male connectors
- Output Wiring
- Two pins for DC power, three pins for balanced audio Pin 1: 48 V DC - (chassis/earth ground) Pin 2: 48 V DC + Pin 3: Audio shield/chassis/earth ground Pin 4: Audio - Pin 5: Audio +
- Output Voltage
- 48 V DC per channel
AC POWER
- AC Connector
- powerCON 20
- Voltage Selection
- Automatic
- Safety Rated Voltage Range
- 100–240 V AC; 50–60 Hz; 220 W maximum
CURRENT DRAW
- Idle Current
- 0.14 A (115 V AC, 60 Hz); 0.07 A (230 V AC, 50 Hz); 0.15 A rms (100 V AC, 60 Hz)
PHYSICAL
- Dimensions
- 1RU in height, 1/2 width rack mount W: 8.5 in (216 mm) x H: 1.85 in (47 mm) x D: 8.62 in (219 mm)
- Weight
- 4.4 lb (2 kg)
- Rigging
- M6 threads on sides and bottom to support mounting; optional MPS-482HP Wall Bracket for flat surface mounting; optional MPS-482HP 2RU Tray for mounting two MPS-482HPs in a standard 19-inch wide, 2 RU rack slot
ENVIRONMENTAL
- Operating Temperature
- 0° C to +45° C
- Non-operating Temperature
- -40° C to +75° C
- Humidity
- To 95% at 35° C
- Operating Altitude
- To 5,000 m (16,404 ft)
- Non-operating Altitude
- To 6,300 m (25,000 ft)
- Shock
- 30 g 11 msec half-sine on each of 6 sides
- Vibration
- 10–55 Hz (0.010 m peak-to-peak excursion)
