Meyer Sound
Meyer Sound
MM-4XP
- Product code
- MM-4XP
- Category
- Audio
- Family
- mm-4xp
- Weight
- 1.9 kg
Specifications
ACOUSTICAL
- Operating Frequency Range
- 120 Hz – 18 kHz
- Frequency Response
- 135 Hz – 17 kHz ±4 dB
- Phase Response
- 400 Hz – 20 kHz ±45°
- Linear Peak SPL
- 111.5 dB with crest factor >16.5 dB (M-noise), 109 dB (Pink noise), 111 dB (B-noise)
COVERAGE
- Horizontal Coverage
- 80° (3 kHz – 14 kHz ±10°); 120° (below 2 kHz)
- Vertical Coverage
- 80° (3 kHz – 14 kHz ±10°); 120° (below 2 kHz)
AUDIO INPUT
- Type
- Differential, electronically balanced
- Maximum Common Mode Range
- ±5 V DC
- Connector
- SwitchCraft EN3 5-pin male (two pins for 48 V DC power, three pins for balanced audio)
- Input Impedance
- 10 kΩ electronically balanced
- Wiring
- Pin 1: DC power (–) Pin 2: DC power (+) Pin 3: Audio shield, chassis/earth Pin 4: Audio (–) Pin 4: Audio (–) Pin 5: Audio (+)
- Nominal Input Sensitivity
- –2.5 dBV (0.75 V rms) continuous average is typically the onset of limiting for noise and music
- Input Level
- Audio source must be capable of producing +16 dBV (6.3 V rms) into 50 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
AMPLIFIER
- Type
- Class-D
- Total Output Power
- 440 W peak
- THD, IM, TIM
- < 0.02%
- Cooling
- Convection
DC POWER
- Connector
- SwitchCraft EN3 5-pin male (two pins for 48 V DC power, three pins for balanced audio)
- Safety Agency Rated Voltage
- 48 V DC
PHYSICAL
- Dimensions
- W: 4.04 inch (103 mm) x H: 4.04 inch (103 mm) x D: 5.72 inch (145 mm)
- Weight
- 4.2 lb (1.9 kg)
- Enclosure
- Sealed extruded aluminum with standard white-painted or black-anodized finish
- Protective Grille
- Perforated steel
- Mounting
- Two 3/8-inch – 16 side inserts; optional MUB-MM4XP U-bracket
