Meyer Sound
Meyer Sound
LINA
- Product code
- LINA
- Category
- Audio
- Family
- lina
- Weight
- 19.5 kg
Specifications
ACOUSTICAL
- Operating Frequency Range
- 65 Hz – 18 kHz
- Phase Response
- 100 Hz – 18 kHz ±45°
- Maximum SPL
- 138 dB
- Linear Peak SPL
- 132 dB with 19 dB crest factor (M-noise), 128 dB (Pink noise), 130 dB (B-noise)
COVERAGE
- Horizontal Coverage
- 100°
- Vertical Coverage
- Varies, depending on array length and configuration
TRANSDUCERS
- Low Frequency
- Two 6.5-inch long-excursion cone drivers; 4 Ω nominal impedance
- High Frequency
- One 3-inch diaphragm compression driver coupled to a constant-directivity horn through a patented REM® manifold; 8 Ω nominal impedance
AUDIO INPUT
- Type
- Differential, electronically balanced
- Maximum Common Mode Range
- ±15 V DC, clamped to earth for voltage transient protection
- Connectors
- XLR 3-pin female input with male loop output. Optional XLR 5-pin connector to accommodate both balanced audio and RMS signals.
- Input Impedance
- 10 kΩ differential between pins 2 and 3
- Wiring
- Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies Pin 2: Signal + Pin 3: Signal – Pin 4: RMS Pin 5: RMS Case: Earth ground and chassis
- Nominal Input Sensitivity
- 0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music
- Input Level
- Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
AMPLIFIER
- Type
- 3-channel, Class-D
- Total Output Power
- 1950 W peak
- THD, IM, TIM
- < 0.02%
- Cooling
- Convection
AC POWER
- Connector
- powerCON 20 input with loop output
- Automatic Voltage Selection
- 90–265 V AC, 50–60 Hz
- Safety Rated Voltage Range
- 100–240 V AC, 50–60 Hz
- Turn-on and Turn-off Points
- 90 V AC turn-on, no turn-off; internal fuse-protection above 265 V AC
CURRENT DRAW
- Idle Current
- 0.25 A rms (115 V AC); 0.25 A rms (230 V AC); 0.29 A rms (100 V AC)
- Maximum Long-Term Continuous Current (>10 sec)
- 2.3 A rms (115 V AC); 1.16 A rms (230 V AC); 2.8 A rms (100 V AC)
- Burst Current (<1 sec)
- 3.9 A rms (115 V AC), 1.7 A rms (230 V AC), 4.5 A rms (100 V AC)
- Maximum Instantaneous Peak Current
- 8.8 A peak (115 V AC), 4.0 A peak (230 V AC), 9.2 A peak (100 V AC)
- Inrush Current
- < 20.0 A peak
PHYSICAL
- Dimensions
- W: 20.27 in (515 mm) x H: 8.38 in (213 mm) x D: 15.32 in (389 mm)
- Weight
- 43 lb (19.5 kg)
- Enclosure
- Premium multi-ply birch, slightly textured black finish
- Protective Grille
- Powder-coated, hex-stamped steel with acoustical black mesh
- Rigging
- End frames with captive GuideALinks secured with 0.25 in x 0.53 in quick release pins that allow 0° to 11° splay angles. M6 attachment points for optional MYA-MINA/LINA mounting yoke and MUB- MINA/LINA U-bracket
