HMS-5

Specifications

Operating Frequency Range: 55 Hz – 18 kHz
Frequency Response: 56 Hz – 18 kHz ± 4 dB
Phase Response: e 250 Hz – 18 kHz ±45°
Linear Peak SPL: 121 dB with crest factor >17 dB (M-noise) , 119 dB (Pink noise), 120 dB (B-noise)

Low Frequency: Two 5-inch long- excursion cone drivers; 8 Ω nominal impedance
High Frequency: One 2-inch diaphragm compression driver; 12 Ω nominal impedance

Type: Differential, electronically balanced
Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
Connectors: One Phoenix 5-pin male composite input
Input Impedance: 10 kΩ differential between Audio (+) and Audio (–)
Wiring: Pin 1: DC power (–); Pin 2: DC power (+); Pin 3: Audio shield chassis/earth; Pin 4: Audio (–); Pin 5: Audio (+)
Nominal Input Sensitivity: 6 dBV (2.0 V rms) continuous is typically the onset of limiting for noise and music
Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.

Type: 3-channel with active crossover
Total Output Power: 600 W peak
THD, IM, TIM: < 0.02%
Cooling: Convection
POWER: DC POWER
Connector: One Phoenix 5-pin male composite input (see Wiring above)
Voltage Requirements: 48 V DC (Meyer Sound IntelligentDC External Power Supply Required)
Automatic Voltage Selection: N/A
Safety Agency Rated Voltage Range: N/A
Turn-on and Turn-off Points: N/A

Dimensions: W: 15.00 in (381 mm) x H: 12.45 in (316 mm ) x D: 9.66 in (245 mm
Weight: 18.4 lb (8.3 kg)
Enclosure: Premium multi-ply birch with slightly textured black finish
Grille Frame: Acoustically transparent, detachable, black cloth-covered frame
Rigging: Rear attachment points 3.94 in x 3.94 in (100 mm x 100 mm)