Amie-Sub

Specifications

Operating Frequency Range: 22 Hz – 160 Hz
Frequency Response: 25 Hz – 145 Hz ±4 dB
Phase Response: 33 Hz – 145 Hz ±30°
Linear Peak SPL: 124.5 dB with >11.5 dB crest factor (M-noise), 124.5 dB (Pink noise), 126 dB (B-noise)

Low Frequency: One 15 inch long-excursion cone driver; 3 Ω nominal impedance

Type: Differential, electronically balanced
Maximum Common Mode Range: ±15 V DC, clamped to earth for transient voltage protections
Input Impedance: 10 kΩ differential between Audio(+) and Audio(– )
Nominal Input Sensitivity: 6 dBV (2.0 V rms) continuous is typically the onset of limiting for noise and music
Input Level: Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
XLR Wiring: Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies Pin 2: Audio(+) Pin 3: Audio(–) Case: Earth ground and chassis
Looping Input Module Connectors: XLR 3-pin female with male loop output
2.1 Integration Module Connectors: XLR 3-pin female inputs (channels 1, 2 and LFE) XLR 3-pin male loop outputs (channels 1 and 2)
7.1 Integration Module Connectors: DB-25 female connector inputs (channels 1 to 7 and LFE) DB-25 female connector outputs (channels 1 to 7 and LFE + bass management)

Connector: powerCON 20 input with loop output to feed Amie loudspeakers
Automatic Voltage Selection: 90–265 V AC
Safety Rated Voltage Range: 100–240 V AC, 50–60 Hz
Turn-on and Turn-off Points: 90 V AC turn-on, no turn-off; internal fuse-protection above 265 V AC

Idle Current: 0.25 A rms (115 V AC); 0.23 A rms (230 V AC); 0.25 A rms (100 V AC)
Maximum Long-Term Continuous Current (>10 sec): 1.4 A rms (115 V AC); 0.7 A rms (230 V AC); 1.5 A rms (100 V AC)
Burst Current (<1 sec): 2.9 A rms (115 V AC); 1.5 A rms (230 V AC); 3.4 A rms (100 V AC)
Maximum Instantaneous Peak Current: 7.4 A peak (115 V AC); 3.7 A peak (230 V AC); 8.5 A peak (100 V AC)
Inrush Current: <20.0 A peak

Dimensions: W: 24.00 in (609 mm) x H: 17.5 in (444 mm) x D: 19.00 in (482 mm)
Weight: 74 lb (33.5 kg)
Enclosure: Premium multi-ply birch with low-gloss, slightly textured black finish
Protective Grille: Powder-coated, hex-stamped steel with optional black cloth grille that attaches to the steel grille
Rigging: Side nut-plates with 3/8-inch by 16 threads for the optional MUB-Amie-Sub U-bracket