Meyer Sound
Meyer Sound
Amie
- Product code
- AMIE
- Category
- Audio
- Family
- amie
- Weight
- 11.3 kg
Specifications
ACOUSTICAL
- Operating Frequency Range
- 42 Hz – 22 kHz
- Frequency Response
- 45 Hz – 20 kHz ± 4 dB
- Phase Response
- 190 Hz – 20 kHz ±45°
- Linear Peak SPL
- 120.5 dB with 18.5 dB crest factor (M-noise), 117.5 dB (Pink noise), 120 dB (B-noise)
COVERAGE
- Horizontal Coverage
- 80°
- Vertical Coverage
- 50°
TRANSDUCERS
- Low Frequency
- One 6.5-inch long-excursion cone driver; 4 Ω nominal impedance
- High Frequency
- One 1-inch dome tweeter on a constant-directivity waveguide; 4 Ω nominal impedance
AUDIO INPUT
- Type
- Differential, electronically balanced
- Maximum Common Mode Range
- ±15 V DC
- Connectors
- XLR 3-pin female input with male loop output.
- Input Impedance
- 10 kΩ differential between pins 2 and 3
- Wiring
- Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies Pin 2: Signal + Pin 3: Signal – Case: Earth ground and chassis
- Nominal Input Sensitivity
- 6 dBV (2.0 V rms) continuous is typically the onset of limiting for noise and music
- Input Level
- Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
AMPLIFIER
- Type
- Two-channel, Class-D
- Total Output Power
- 900 W peak
- THD, IM, TIM
- < 0.02%
- Cooling
- Convection
AC POWER
- Connector
- powerCON 20 input with loop output (up to 7 Amie loudspeakers may be safely looped)
- Automatic Voltage Selection
- 90–265 V AC
- Safety Agency Rated Voltage Range
- 100–240 V AC, 50–60 Hz
- Turn-on and Turn-off Points
- 90 V AC turn-on, no turn-off; internal fuse-protection above 265 V AC
CURRENT DRAW
- Idle Current
- 0.160 A rms (115 V AC); 0.144 A rms (230 V AC); 0.183 A rms (100 V AC)
- Maximum Long-Term Continuous Current (>10 sec)
- 0.68 A rms (115 V AC); 0.36 A rms (230 V AC); 0.79 A rms (100 V AC)
- Burst Current (<1 sec)
- 1.02 A rms (115 V AC), 0.51 A rms (230 V AC), 1.2 A rms (100 V AC)
- Maximum Instantaneous Peak Current
- 2.7 A peak (115 V AC), 1.4 A peak (230 V AC), 3.1 A peak (100 V AC)
- Inrush Current
- <20.0 A peak
PHYSICAL
- Dimensions
- W: 9.00 in (229 mm) x H: 15.30 in (389 mm) x D: 13.24 in (336 mm)
- Weight
- 25 lb (11.3 kg)
- Enclosure
- Premium multi-ply birch, low-gloss slightly textured black finish
- Rigging
- 3/8-inch - 16 threaded side attachment points for optional mounting accessories
