Martin Lighting

Martin ERA 600 Profile

Designed to fulfill the demand for a compact, tour-worthy, LED profile moving head with enhanced gobo load-out, the Martin ERA 600 Profile combines a no-nonsense, feature-loaded and cost-efficient profile that’s perfect for entertainment and rental applications.

Product code: ERA-600-PROFILE
Category: Lighting
Weight: 31.3 kg

Specifications

Physical

Weight: 31.3 kg (69.0 lbs.); Minimum center-to-center distance in side-by-side installation: 660 mm (26.0 in.)
Length (head): 544 mm (21.5 in.)
Length (base): 416 mm (16.4 in.)
Width (base): 290 mm (11.4 in.)
Width (across yoke): 390 mm (15.4 in.)
Height (head straight up): 734 mm (28.9 in.)
Height (maximum): 745 mm (29.4 in.)

Dynamic Effects

Color mixing: CMY, independently variable 0-100%
Color wheel: 7 color filters plus open
Gobo animation: Animation wheel, indexing, continuous rotation with variable speed and direction
Rotating gobo wheel: 7 gobos plus open, wheel rotation, gobo rotation, indexing and shake
Second rotating gobo wheel: 7 gobos plus open, wheel rotation, gobo rotation, indexing and shake
Static gobo wheel: 8 gobos plus open, wheel indexing, rotation and shake
Iris: 0-100%
Zoom: Motorized
Color temperature control: Variable 6500 - 2700 K
Prism: 2 rotating/indexing prisms (4-facet circular and 6-facet linear)
Frost: Heavy frost effect
Electronic dimming: 0 - 100%, four dimming curve options
Electronic shutter effect: Strobe effect, pulse effects, instant open and blackout
Pan: 540°, coarse & fine control and speed
Tilt: 260°, coarse & fine control and speed
Focus: Motorized

Control and Programming

Control options: DMX
Setting and addressing: Control panel with backlit LCD display
16-bit control: Dimming, CMY, CTO, Zoom, Focus, Pan and Tilt
DMX channels: 35
DMX compliance: USITT DMX512/1990
RDM compliance: ANSI/ESTA E1.20
Transceiver: Opto-isolated RS-485

Optics

Front lens diameter: 120 mm (4.75 in.)
Zoom range: 6° - 45° (1:7.5)
Light source: 550 W LED engine
Minimum LED lifetime: 20000 hours (to >70% luminous output)*
Binning: Tight color and flux binning; *Manufacturer´s figure obtained under manufacturer´s test conditions

Photometric Data

Color Temperature: 2,700 - 6,500 K
Light engine luminous output: 37,000 lumens
LED refresh rate: 3600 Hz Standard Fixture luminous output: 19,000 lumens
CRI (Color Rendering Index): >70
CQS (Color Quality Scale): >67
TM-30 Rf (IES TM-30-15 Fidelity Index): >65
TM-30 Rg (IES TM-30-15 Gamut Index): >96
TLCI (Television Lighting Consistency Index): >45
CCT: 6800 K (+/- 250 K)
Peak Luminous Intensity: 1,102,000 cd With Optional CRI Boost Filter Fixture luminous output: 13,000 lumens
CRI (Color Rendering Index): >79
CQS (Color Quality Scale): >74
TM-30 Rf (IES TM-30-15 Fidelity Index): >75
TM-30 Rg (IES TM-30-15 Gamut Index): >98
TLCI (Television Lighting Consistency Index): >56
CCT: 6500 K (+/- 250 K)
Peak Luminous Intensity: 783,000 cd; * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Construction

Housing: High-impact flame-retardant thermoplastic
Color: Black
Protection rating: IP20

Gobos

Maximum image diameter: 19 mm (0.75 in.)
Gobo material: Borofloat 33
External diameter: 23.0 mm +0 / -0.2 mm (0.906 in. +0 / -0.008 in.)
Maximum gobo thickness: 1.1 mm (0.04 in.)
Coating: Heavy matted aluminum

Installation

Mounting points: 2 pairs of 1/4-turn points for 106 mm (4.17 in.) center-to-center omega brackets
Location: Dry location only, must be fastened to surface or structure
Orientation: Any
Minimum distance to combustible materials: 0.2 m (8 in.)
Minimum distance to illuminated surfaces: 2.0 m (6.6 ft.)

Connections

DMX and RDM data in/out: 5-pin locking XLR
AC mains power input.: Neutrik TRUE1 socket, accepts TRUE1 NAC3FX-W (TOP) connector
AC mains power throughput: Neutrik TRUE1 socket, accepts TRUE1 NAC3MX-W (TOP) connector

Electrical

AC power: 100-240 V AC nominal, 50/60 Hz; Power supply unit: Auto-ranging electronic switch mode; Typical half-cycle RMS inrush current at 230 V, 50 Hz: 21.8 A; Power Factor: 0.99 @ 120 V , 0.97 @ 230 V; Typical current draw: 6.5 A @ 120 V , 3.2 A @ 230 V *; Power Consumption; Maximum: 856 W; Typical: 778 W *; Idle: 64 W *; * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.; Typical: full output white, no effects moving, regulated fan speed.; Idle: no output, no effects moving, regulated fan speed.

Thermal

Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F)
Maximum total heat dissipation, calculated, +/- 10%: 2920 BTU/hr.

Acoustic Data

Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 46.1 dB(A)

Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 39.1 dB(A)

Environmental

RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
Efficacy (max output): 25.4 lm/W
LWR*: 607 lm/kg (275 lm/lb); LWR = Lumen-to-Weight Ratio

Approvals

Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN62493
EU EMC: EN 55015, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-3 (B) / NMB-3 (B); ICES-5 (B) / NMB-5 (B)
Australia/NZ: RCM

Included Items

Two omega brackets with 1/4 turn fasteners for rigging clamp attachment: 2 x P/N 91602001

Accessories

Conversion kits; Framing Module (converts ERA 600 Profile to Performance): P/N 5125849-00; Gobo Wheel 3 Effects Module (converts ERA 600 Performance to Profile): P/N 5131771-00; Optical accessories; CRI Boost Filter (CRI >79, installs on gobo wheel): MAR-91614058; Power input cables; Power Input Cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.) : P/N 91611797; Power Input Cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786; Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173; Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174; Power relay cables, 16 A; Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784; Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785; Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796; Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170; Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171; Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172; Power connectors; Cable Connector, Neutrik powerCON TRUE1 NAC3FX-W TOP (female): P/N 91611789HU; Cable Connector, Neutrik powerCON TRUE1 NAC3MX-W TOP (male): P/N 91611788HU; Installation hardware; G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003; Half-coupler Clamp: P/N 91602005; Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007; T-shape omega bracket with 1/4 turn, PN 91602008

Ordering Information

ERA 600 Profile in cardboard box: P/N 9025123579
ERA 600 Profile (White) in cardboard box: P/N 9025123580
Flightcase, two unit, for 2 x ERA 600 Performance / Profile: P/N 91512205

Specification from Martin Lighting