Martin Lighting

Martin ERA 400 Performance WRM

Designed to fulfill the demand for a bright, compact, tour-worthy moving head, the Martin ERA 400 Performance WRM combines a feature-loaded and rugged, yet cost-efficient profile for entertainment and rental applications.

Product code: ERA-400-PERFORMANCE-WRM
Category: Lighting
Weight: 22.5 kg

Specifications

Status

Status: Discontinued

Physical

Length: 379 mm (14.9 in.)
Width: 237 mm (9.3 in.)
Height: 632 mm (24.9 in)
Weight: 22.5 kg (49.6lbs)

Dynamic Effects

Color mixing: CMY, independently variable 0-100%
Color wheel: 9 color filters plus open
Rotating gobo wheel: 7 gobos plus open, wheel rotation, gobo rotation, indexing and shake
Static gobo wheel: 9 gobos plus open, wheel indexing, rotation and shake
Iris: 0-100%
Zoom: Motorized
Framing: Rotatable framing module, +/- 45°, with 4 individually controllable full framing blades with variable angle and position.
Prism: Rotating/indexing three-facet prism
Electronic dimming: 0 - 100%, four dimming curve options
Electronic shutter effect: Strobe effect, pulse effects, instant open and blackout
Pan: 540°, coarse & fine control and speed
Tilt: 260°, coarse & fine control and speed
Focus: Motorized

Control and Programming

Control options: DMX
Setting and addressing: Control panel with backlit LCD display
16-bit control: Dimming, pan and tilt
DMX channels: 30
DMX compliance: USITT DMX512/1990
RDM compliance: ANSI/ESTA E1.20
Transceiver: Opto-isolated RS-485

Optics

Front lens diameter: 110 mm
Zoom range: 10° - 30°
Light source: 300W LED engine
Minimum LED lifetime: 20000 hours (to >70% luminous output)*
Binning: Tight color and flux binning; *Manufacturer´s figure obtained under manufacturer´s test conditions

Photometric Data

Light engine luminous output: 15500 lumens
Fixture luminous output: 6000 lumens
CRI (Color Rendering Index): >91
CCT: 3200 Kelvin
LED refresh rate: 1200 Hz; * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Construction

Housing: High-impact flame-retardant thermoplastic
Color: Black
Protection rating: IP 20

Gobos

Gobo diameter: 26.8 mm +/- 0.2 mm (1.1 in. +/- 0.008 in.)
Maximum image diameter: 19.0 mm (0.75 in.)
Gobo thickness, maximum: 1.1mm borosilicate glass

Installation

Mounting points: Two quarter-turn brackets for rigging
Orientation: Any

Connections

AC power input: Neutrik powerCON TRUE1
DMX data in/out: 3-pin & 5-pin locking XLR

Electrical

AC power: 100-240 V AC nominal, 50/60 Hz; Power supply unit: Auto-ranging electronic switch mode; Typical half-cycle RMS inrush current at 230 V, 50 Hz: 6.0 A; Power Factor: 0.99 @ 120 V , 0.97 @ 230 V; Typical current draw: 3.8 A @ 120 V , 2.0 A @ 230 V *; Power Consumption; Typical: 455 W *; Idle: 44 W *; * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.; Typical: full output white, no effects moving, regulated fan speed.; Idle: no output, no effects moving, regulated fan speed.

Thermal

Cooling: Forced air (temperature regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C
Minimum ambient temperature (Ta min.): 0° C
Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F)
Total heat dissipation (calculated, +/- 10%): 1550 BTU/hr.

Environmental

RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
Efficacy (max output): 13.5 lm/W
LWR*: 262 lm/kg (119 lm/lb); LWR = Lumen-to-Weight Ratio

Approvals

Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015; EN 55032; EN 55035; EN 61000-3-2,-3; EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-003 Class B, ICES-005 Class B
Australia/NZ: RCM

Included Items

2 x Omega brackets for rigging clamp attachment

Accessories

Cables, 16 A, for connection to power in chains: Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797; Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786; Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173; Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
Cables, 16 A, for relaying power in chains: Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784; Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785; Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611786; Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170; Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171; Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172
Connectors: Power connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789; Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788
Installation hardware: G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003; Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007; Half-coupler Clamp: P/N 91602005; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information

Martin ERA 400 Performance WRM in cardboard box: P/N 9025121795
Flightcase, two unit for ERA 400: P/N 91511217

Specification from Martin Lighting