Martin Lighting

Martin ERA 300 Profile

The Martin ERA 300 Profile is a very compact profile fixture with an extremely efficient 260W white LED engine that produces a sharp gobo projection with a flat field and more output than typically associated with similar-sized and featured fixtures.

Product code: ERA-300-PROFILE
Category: Lighting
Weight: 17 kg

Specifications

Physical

Length: 375 mm (14.8 in.)
Width: 217 mm (8.5 in.)
Height: 564 mm (22.2 in.)
Weight: 17kg (38.0 lbs)

Dynamic Effects

Color mixing: CMY, independently variable 0-100%
Color wheel: 9 color filters plus open
Beam effects: Rotating three-facet prism
Rotating gobo wheel: 7 gobos plus open, wheel rotation, gobo rotation, indexing and shake
Static gobo wheel: 9 gobos plus open, wheel indexing, rotation and shake
Iris: 0-100%
Zoom: Motorized
Electronic dimming: 0 - 100%, four dimming curve options
Electronic shutter effect: Strobe effect, pulse effects, instant open and blackout
Pan: 540°, coarse & fine control and speed
Tilt: 260°, coarse & fine control and speed
Focus: Motorized

Control and Programming

Control options: DMX
Setting and addressing: Control panel with backlit LCD display
16-bit control: Dimming, pan and tilt
DMX channels: 21
DMX compliance: USITT DMX512/1990
RDM compliance: ANSI/ESTA E1.20
Transceiver: Opto-isolated RS-485

Optics

Zoom range: 13° - 28°
Light source: 260W LED engine
Minimum LED lifetime: 20,000 hours (to >70% luminous output)*
Binning: Tight color and flux binning; *Manufacturer´s figure obtained under manufacturer´s test conditions.

Photometric Data

Light engine luminous output: 20,000 lumens
Fixture luminous output: 9,500 lumens
CRI (Color Rendering Index): >70
Color Temperature: 6,500 K
LED refresh rate: 1200 Hz; * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Construction

Housing: High-impact flame-retardant thermoplastic
Color: Black/White
Protection rating: IP20

Gobos

Gobo diameter: 26.8 mm +/- 0.2 mm (1.1 in. +/- 0.008 in.)
Maximum image diameter: 19.0 mm (0.75 in.)
Gobo thickness, maximum: 1.1mm borosilicate glass

Installation

Mounting points: Two quarter-turn brackets for rigging clamps
Orientation: Any

Connections

AC power in, thru: Neutrik powerCON TRUE1
DMX data in/out: 3-pin & 5-pin locking XLR

Electrical

AC power: 100-240 V AC nominal, 50/60 Hz; Power supply unit: Auto-ranging electronic switch mode; Power Factor: 0.99 @ 120 V / 230 V; Typical current draw: 3.1 A @ 120 V , 1.6 A @ 230 V *; Power Consumption; Typical: 374 W *; * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.; Typical: full output white, no effects moving, regulated fan speed.

Thermal

Cooling: Forced air (temperature regulated, low noise)
Total heat dissipation (calculated, +/- 10% at 230 V, 50 Hz): 1300 BTU/hr
Maximum ambient temperature (Ta max.): 40° C
Minimum ambient temperature (Ta min.): 0° C

Environmental

RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
Efficacy (max output): 30.3 lm/W
LWR*: 559 lm/kg (250 lm/lb); LWR = Lumen-to-Weight Ratio

Approvals

Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015; EN 55032; EN 55103-2; EN 61000-3-2,-3; EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-003 Class B, ICES-005 Class B
Australia/NZ: RCM

Included Items

Power cable, 1.5 m (4.9 ft.) 18AWG/0.75 mm2 without mains plug; Omega brackets for rigging clamp attachment

Accessories

Cables, 16 A, for connection to power in chains: Power input cable, H07RN-F, 2.5 mm 2 , 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797; Power input cable, H07RN-F, 2.5 mm 2 , 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786; Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173; Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
Cables, 16 A, for relaying power in chains: Power relay cable, H07RN-F, 2.5 mm 2 , TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784; Power relay cable, H07RN-F, 2.5 mm 2 , TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785; Power relay cable, H07RN-F, 2.5 mm 2 , TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611786; Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170; Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171; Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172
Connectors: Power connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789; Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788
Installation hardware: G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003; Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007; Half-coupler Clamp: P/N 91602005; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information

Martin ERA 300 Profile in cardboard box: P/N 9025109547
Martin ERA 300 Profile White in cardboard box: P/N 9025109886

Specification from Martin Lighting