Martin Lighting

Martin ELP PAR IP

The Martin ELP PAR IP static LED fixture sets a new standard in the static wash category, with unprecedented lumen output, high-intensity narrow zoom, full-gamut color calibration and smart rigging and control features.

Product code: ELP-PAR-IP
Category: Lighting
Weight: 9.1 kg

Specifications

Physical

Length: 315 mm (12.4 in.)
Width: 285 mm (11.3 in.)
Height: 398 mm (15.7 in.) with bracket
Weight: 9.1 kg (20.1 lbs.)

Dynamic Effects

Color mixing: RGBW
Color presets: 48 color presets, virtual color wheel effects
Zoom: Motorized
Electronic dimming: 0 - 100%, four dimming curve options
Strobe and pulse effects: Variable speed and action, random strobe
Electronic shutter effect: Instant open and blackout
Color temperature: Variable 1,800 – 12,850 K

Control and Programming

Control options: DMX, RDM
16-bit fine control: Dimming, RGB, Zoom
LED color management modes: Raw, extended and calibrated
DMX address setting: Control panel with OLED display
DMX channels: 14
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20

Optics

Light source: 7 x 40 W RGBW Osram LEDs
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
Beam angle (half-peak): 4.4 – 33.3°
Field angle (one-tenth peak): 5.5 – 50.0°
Binning: Tight color and flux binning
Calibration: Full Gamut and Color Calibration
Maximum output: 3,350 lumens; *Figure obtained under manufacturer´s test conditions

Photometric Data

Wide beam: 3,350 lumens
Narrow beam: 1,626 lumens
Fixture Center Intensity Narrow Beam: 329,058 cd
Fixture Center Intensity Wide beam: 10,141 cd
CRI (Color Rendering Index): >70
CQS (Color Quality Scale): 84
TM-30 Rf (IES TM-30-15 Fidelity Index): 79
TM-30 Rg (IES TM-30-15 Gamut Index): 116
TLCI (Television Lighting Consistency Index): 61
CCT: 6,500 K
LED refresh rate - Standard Mode: 3,600 Hz
LED refresh rate - Theatre Mode: 19,200 Hz; *All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient

Construction

Housing: Aluminum and composite
Filter mount: 191 x 191 mm (7.5 x 7.5 in.)
Color: Black
Ingress protection rating: IP65

Installation

Mounting points: Adjustable bracket, surface or truss mount (fits Martin Omega Bracket)
Location: Wet locations, temporary outdoor use, not for household use
Orientation: Any
Minimum distance to combustible materials: 0.5 m (1.7 ft.)
Minimum distance to illuminated surfaces: 1 m (3.3 ft.)
Minimum clearance around fan and air vents: 0.5 m (1.7 ft.)

Connections

AC power in, thru: Neutrik PowerCON TRUE1 TOP
DMX data in, thru: Neutrik IP-rated 5-pin locking XLR

Electrical

AC power: 100-240 V AC nominal, 50/60 Hz; Power supply unit: Auto-ranging electronic switch mode; Typical half-cycle RMS inrush current at 230 V, 50 Hz: 11.2 A; Power Factor: 0.99 @ 100 V / 120 V , 0.94 @ 220 V / 230 V / 240 V; Typical current draw: 3.7 A @ 100 V / 120 V , 1.7 A @ 220 V / 230 V / 240 V *; Power Consumption; Typical: 300 W *; Hibernation: 2 W *; * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.; Typical: full output white, no effects moving, regulated fan speed.; Hibernation: no output, motors de-energized, fans stopped, wake-up procedure to re-use fixture.

Thermal

Cooling: Forced air (temperature regulated, low noise)
Total heat dissipation*: 1126 BTU/hr.; *Calculated, +/- 10%, at full intensity, full white
Maximum surface temperature: 71° C (160° F)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): -10°C (14° F)

Acoustic Data

Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 40.9 dB(A)

Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 37.9 dB(A)

Environmental

RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
Efficacy (max output): 14.3 lm/W
LWR*: 385 lm/kg (174 lm/lb); LWR = Lumen-to-Weight Ratio

Approvals

Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-003 Class B, ICES-005 Class B
Australia/NZ: RCM
United Kingdom: UKCA INCLUDED ITEMS; Adjustable mounting bracket ACCESSORIES; Power input cables, 16 A; Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.): P/N 91611797; Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.): P/N 91610173 Power relay cables, 16 A, for relaying power to fixtures in chains; Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796; Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172 Power connectors; Cable Connector, Neutrik powerCON TRUE1 NAC3FX-W TOP (female): P/N 91611789HU
Cable Connector, Neutrik powerCON TRUE1 NAC3MX-W TOP (male): P/N 91611788HU Installation hardware
Martin Omega bracket for rigging clamp attachment: P/N 91602001
Half-coupler clamp: P/N 91602005
G-clamp (suspension vertically downwards only): P/N 91602003
Quick-trigger clamp (suspension vertically downwards only): P/N 91602007
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information

ELP PAR IP in cardboard box: P/N MAR-90800010
ELP PAR IP - White in cardboard box: P/N MAR-90800015

Specification from Martin Lighting