Martin Lighting

Martin ELP PAR

The Martin ELP PAR static LED fixture sets a new standard in the static wash category, with unprecedented lumen output, high-intensity narrow zoom, full-gamut color calibration and smart rigging and control features.

Product code: ELP-PAR
Category: Lighting
Weight: 7.8 kg

Specifications

Physical

Length: 312 mm (12.3 in.)
Width: 287 mm (11.3 in.)
Height: 401 mm (15.8 in.) with bracket
Weight: 7.8 kg (17.2 lbs.)

Dynamic Effects

Color mixing: RGBW
Color presets: 48 color presets, virtual color wheel effects
Zoom: Motorized
Color temperature control: Variable 1,800 – 12,850K
Electronic dimming: 0 - 100%, four dimming curve options
Strobe and pulse effects: Variable speed and action, random strobe
Electronic shutter effect: Instant open and blackout

Control and Programming

Control options: DMX, RDM
16-bit fine control: Dimming, RGB, zoom
LED color management modes: Raw, extended and calibrated
DMX address setting: Control panel with OLED display
DMX channels: 14
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Firmware update: via DMX using Martin Companion

Optics

Light source: 7 x 40 W RGBW Osram LEDs
Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
Beam angle (half-peak): 4.2° - 38.7°
Field angle (one-tenth peak): 5.1° - 58.6°
Cutoff angle (3%): 5.7° - 69.6°
Binning: Tight color and flux binning
Calibration: Full Gamut Color Calibration; *Figure obtained under manufacturer's test conditions

Photometric Data

Wide beam: 3,525 lumens
Narrow beam: 1,445 lumens
Fixture Center Intensity Narrow Beam: 390,083 cd
Fixture Center Intensity Wide beam: 9,957 cd
CRI (Color Rendering Index): >70
CQS (Color Quality Scale): 83
TM-30 Rf (IES TM-30-15 Fidelity Index): 77
TM-30 Rg (IES TM-30-15 Gamut Index): 117
TLCI (Television Lighting Consistency Index): 61
CCT: 6,500 K
LED refresh rate - Standard Mode: 3600 Hz
LED refresh rate - Theatre Mode: 19200 Hz; *All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Construction

Housing: Aluminum and composite
Filter mount: 191 x 191 mm (7.5 x 7.5 in.)
Color: Black
Protection rating: IP 20

Installation

Mounting points: Adjustable bracket, surface or truss mount (fits Martin Omega Bracket)
Location: Not for household use, indoor use in dry location only
Orientation: Any
Minimum distance to combustible materials: 0.5 m (1.7 ft.)
Minimum distance to illuminated surfaces: 1 m (3.3 ft.)
Minimum clearance around fan and air vents: 0.5 m (1.7 ft.)

Connections

AC power input/output: Neutrik PowerCON TRUE1 TOP
DMX and RDM data in/out: Neutrik 5-pin locking XLR

Electrical

AC power: 100-240 V AC nominal, 50/60 Hz; Power supply unit: Auto-ranging electronic switch mode; Typical half-cycle RMS inrush current at 240 V, 50 Hz: 8.7 A; Power Factor: 0.99 @ 100 V / 120 V , 0.94 @ 220 V / 230 V / 240 V; Typical current draw: 3.0 A @ 100 V / 120 V , 1.7 A @ 220 V / 230 V / 240 V *; Power Consumption; Typical: 300 W *; Hibernation: 3 W *; * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.; Typical: full output white, no effects moving, regulated fan speed.; Hibernation: no output, motors de-energized, fans stopped, wake-up procedure to re-use fixture.

Thermal

Cooling: Forced air (temperature regulated, low noise)
Total heat dissipation (calculated): 1170 BTU/hr.
Maximum surface temperature: 65° C (149° F)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): -10° C (14° F)

Acoustic Data

Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 37.1 dB(A)

Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 33.0 dB(A)

Environmental

RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
Efficacy (max output): 14.9 lm/W
LWR*: 449 lm/kg (204 lm/lb); LWR = Lumen-to-Weight Ratio

Approvals

Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015; EN 55032; EN 55035; EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-003 Class B, ICES-005 Class B
Australia/NZ: RCM
United Kingdom: UKCA

Included Items

Adjustable mounting bracket; Safety and Installation Manual

Accessories

Power Input Cables; Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91611797; Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 5 m (16.4 ft.) P/N 91611786; Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91610173; Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 5 m (16.4 ft.) P/N 91610174; Power Linking Cables; Power relay cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784; Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785; Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796; Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170; Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171; Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172; Power Connectors; Power Connector, Cable Mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789HU; Power Connector, Cable Mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788HU; Installation Hardware; G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003; Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007; Half-coupler Clamp: P/N 91602005; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information

ELP PAR in cardboard box: P/N MAR-90800000
ELP PAR - White in cardboard box: P/N MAR-90800005

Specification from Martin Lighting