Martin Lighting

Martin ELP CL IP

Martin ELP LED ellipsoidal fixtures deliver the luminance, brightness and vivid color rendering that have been synonymous with the Martin name for more than 30 years.

Product code: ELP-CL-IP
Category: Lighting
Weight: 12.2 kg

Specifications

Physical

Length: 644 mm (25.4 in.)
Width: 255 mm (10.1 in.)
Height: 255 mm (10.1 in.), 527 mm (20.1 in.) with bracket
Weight: 12.2 kg (26.9 lb.) body only

Dynamic Effects

Color mixing: RGBLA
Color Temperature Range: 2000–10000K
Color selection: 26 color presets
Electronic dimming: 0–100%, Four dimming curve options
Strobe and pulse effects: Variable speed and action, random strobe
Electronic shutter effect: Instant open and blackout

Control and Programming

Control options: DMX, stand-alone
Setting and addressing: Control panel with OLED display or via RDM
16-bit control: Intensity, CTC, RGBLA
DMX channels: 1/10/17
PWM: 600–2400 Hz
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Transceiver: Opto-isolated RS-485
Stand-alone programming: Control panel with OLED display

Optics

Light source: 91 x RGBAL Luxeon Rebel LEDs (19 Red, 24 Green, 12 Blue, 24 Lime, 12 Amber)
Minimum LED lifetime: 30 000 hours (to >70% luminous output)*
Color temperature: 2000–10000K
Fixed Lens Tube Options: 19°, 26°, 36° and 50°
Zoom Lens Tube Options: 15–30° and 25–50°
Binning: Tight color and flux binning
Calibration: White Point Color Calibration; *Figure obtained under manufacturer's test conditions

Photometric Data

Light engine luminous output: 20,000 lumens High Output Mode Fixture luminous output: 6,900 lumens
CRI (Color Rendering Index): >85
CQS (Color Quality Scale): >90
TM-30 Rf (IES TM-30-15 Fidelity Index): >84
TM-30 Rg (IES TM-30-15 Gamut Index): >111
TLCI (Television Lighting Consistency Index): >85
CCT: 5500 K (+/- 250 K) High Quality Mode Fixture luminous output: 5,900 lumens
CRI (Color Rendering Index): >90
CQS (Color Quality Scale): >87
TM-30 Rf (IES TM-30-15 Fidelity Index): >84
TM-30 Rg (IES TM-30-15 Gamut Index): >106
TLCI (Television Lighting Consistency Index): >87
CCT: 6000 K (+/- 250 K); * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Construction

Housing: Die-cast aluminum
Color: Black or white variant
Protection rating: IP65

Gobos and Color Frame

Gobo size: A size, 100 mm OD, 75 mm image*; Gobo size: B size, 86 mm OD, 64.5 mm image*
Color frame size: 159 x 159 mm (6.25 in. x 6.25 in.); *Gobo holder not included.

Installation

Mounting: Adjustable bracket
Location: Indoor, outdoor use, suitable for wet locations
Orientation: Any
Minimum distance to combustible materials: 0.2 m (0.7 ft.)
Minimum distance to illuminated surfaces: 0.5 m (1.6 ft.)

Connections

AC power in, thru: IP65-rated Neutrik PowerCON TRUE1 TOP
DMX & RDM data in/thru: IP65-rated 5-pin XLR

Electrical

AC power: 100-240 V AC nominal, 50/60 Hz; Power supply unit: Auto-ranging electronic switch mode; Typical half-cycle RMS inrush current at 230 V, 50 Hz: 18.0 A; Power Factor: 0.99 @ 110 V , 0.96 @ 208 V , 0.95 @ 230 V / 240 V; Typical current draw: 2.4 A @ 110 V , 1.3 A @ 208 V , 1.3 A @ 230 V , 1.1 A @ 240 V *; Power Consumption; Typical: 259 W *; Idle: 5 W *; * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.; Typical: full output white, no effects moving, regulated fan speed.; Idle: no output, no effects moving, regulated fan speed.

Thermal

Cooling: Forced air (temperature-regulated, low noise); Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 1000 BTU/hr.
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 0° C (32° F)

Environmental

RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
Efficacy (max output): 28 lm/W
LWR*: 627 lm/kg (284 lm/lb); LWR = Lumen-to-Weight Ratio

Approvals

Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN62493
EU EMC: EN 55015, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-3 (B)/NMB-3 (B); ICES-5 (B)/ NMB-5 (B)
Australia/NZ: RCM

Included Items

Mounting bracket; User manual

Accessories

Power Input Cables (16 A)*; Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797; Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786; Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173; Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174; Power Relay Cables*; Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1, 0.45 m (1.5 ft.): P/N 91611784; Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1, 1.2 m (3.9 ft.): P/N 91611785; Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1 2.5 m (8.2 ft.): P/N 91611796; Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 0.45 m (1.5 ft.): P/N 91610170; Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 1.2 m (3.9 ft.): P/N 91610171; Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 2.5 m (8.2 ft.): P/N 91610172; Power Connectors*; Neutrik PowerCON TRUE1 NAC3MX-W (male): P/N 91611788HU; Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789HU; *All TRUE1 connectors are IP65-rated TOP type; Spare Parts; Pressure Relief Valve with Gore membrane, M12 x 1.5: P/N 5127883-00; Installation hardware; G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003; Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007; Half-coupler clamp: P/N 91602005; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information

Martin ELP CL IP (Body Only): P/N 9045122814
Martin ELP CL IP (Body Only), White: P/N 9045122816

Specification from Martin Lighting