Martin Lighting

Martin ELP CL

Martin ELP CL LED ellipsoid fixtures deliver the class-leading luminance, output and vivid color rendering that you’ve come to expect from Martin.

Product code: ELP-CL
Category: Lighting
Weight: 7.7 kg

Specifications

Physical

Length: 648 mm (25.5 in.)
Width: 259 mm (10.2 in.)
Height: 254 mm (10 in.), 427 mm (16.8 in.) with bracket
Weight: 7.7 kg (17 lbs) body only

Dynamic Effects

Color mixing: RGBLA
Color Temperature Range: 2000-10000K
Color selection: 26 color presets
Electronic dimming: 0–100%, Four dimming curve options
Strobe and pulse effects: Variable speed and action, random strobe
Electronic shutter effect: Instant open and blackout

Control and Programming

Control options: DMX, stand-alone
Setting and addressing: Control panel with OLED display or via RDM
16-bit control: Intensity, CTC, RGBLA
DMX channels: 1/10/17
PWM: 600-2400 Hz
Standalone programming: Control panel with OLED display
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Transceiver: Opto-isolated RS-485

Optics

Light source: 91 X RGBAL Luxeon Rebel LEDs (19 Red, 24 Green, 12 Blue, 24 Lime, 12 Amber)
Minimum LED lifetime: 30,000 hours (to >70% luminous output)*
Color temperature: 2000-10000K
Lens tube options: 19°, 26°, 36°, 50°
Zoom Lens Tube Options: 15–30° and 25–50°
Binning: Tight color and flux binning
Calibration: White Point Color Calibration; *Figure obtained under manufacturer's test conditions

Photometric Data

Light engine luminous output: 20,000 lumens High Output Mode Fixture luminous output: 6,900 lumens
CRI (Color Rendering Index): >85
CQS (Color Quality Scale): >90
TM-30 Rf (IES TM-30-15 Fidelity Index): >84
TM-30 Rg (IES TM-30-15 Gamut Index): >111
TLCI (Television Lighting Consistency Index): >85
CCT: 5500 K (+/- 250 K) High Quality Mode Fixture luminous output: 5,900 lumens
CRI (Color Rendering Index): >90
CQS (Color Quality Scale): >87
TM-30 Rf (IES TM-30-15 Fidelity Index): >84
TM-30 Rg (IES TM-30-15 Gamut Index): >106
TLCI (Television Lighting Consistency Index): >87
CCT: 6000 K (+/- 250 K); * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Construction

Housing: Die-cast aluminum
Color: Black or white variant
Protection rating: IP20

Gobos and Color Frame

Gobo size: A size, 100 mm OD, 75 mm image*, B size, 86 mm OD, 64.5 mm image*
Color frame size: 159 X 159 mm (6.25 X 6.25 in.); *Gobo holder not included

Installation

Mounting: Adjustable bracket
Location: Indoor use only
Orientation: Any
Minimum distance to combustible materials: 0.2 m (0.7 ft.)
Minimum distance to illuminated surfaces: 0.5 m (1.6 ft.)

Connections

AC power in, thru: Neutrik PowerCON TRUE1
DMX and RDM data in/out: 5-pin locking XLR

Electrical

AC power: 100-240 V AC nominal, 50/60 Hz; Power supply unit: Auto-ranging electronic switch mode; Typical half-cycle RMS inrush current at 230 V, 50 Hz: 15.0 A; Power Factor: 0.99 @ 110 V , 0.96 @ 208 V , 0.95 @ 230 V / 240 V; Typical current draw: 2.4 A @ 110 V , 1.3 A @ 208 V / 230 V , 1.1 A @ 240 V *; Power Consumption; Typical: 259 W *; Idle: 5 W *; * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.; Typical: full output white, no effects moving, regulated fan speed.; Idle: no output, no effects moving, regulated fan speed.

Thermal

Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 0° C (32° F)
Total heat dissipation (calculated, +/- 10%): 1000 BTU/hr. (at full intensity, full white)

Environmental

RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
Efficacy (max output): 28 lm/W
LWR*: 896 lm/kg (406 lm/lb); LWR = Lumen-to-Weight Ratio

Approvals

Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015; EN 55032; EN 55103-2; EN 61000-3-2,-3; EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-003 Class B, ICES-005 Class B
Australia/NZ: RCM

Included Items

Power input cable (0.75mm2, 18 AWG), bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.); Mounting bracket; User manual

Accessories

Cables, 16 A, for connection to power in chains: Power input cables; Power input cable, H07RN-F, 2.5 mm 2 , 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797; Power input cable, H07RN-F, 2.5 mm 2 , 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786; Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173; Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174; Power relay cables; Power Relay Cable, H07RN-F, 2.5 mm 2 , TRUE1-TRUE1 0.45 m (1.5 ft.): P/N 91611784; Power Relay Cable, H07RN-F, 2.5 mm 2 , TRUE1-TRUE1 1.2 m (3.9 ft.): P/N 91611785; Power Relay Cable, H07RN-F, 2.5 mm 2 , TRUE1-TRUE1 2.5 m (8.2 ft.): P/N 91611786; Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 0.45 m (1.5 ft.): P/N 91610170; Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 1.2 m (3.9 ft.): P/N 91610171; Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 2.5 m (8.2 ft.): P/N 91610172
Connectors: Power connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789; Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788
Installation hardware: G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003; Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007; Half-coupler clamp: P/N 91602005; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information

Martin ELP CL (Body Only): P/N 9045107780
Martin ELP CL (Body Only), White: P/N 9045115164

Specification from Martin Lighting