Martin Lighting

Martin DMX PowerPort 375

The DMX PowerPort 375 is a compact and versatile power supply for the entire Martin Creative LED Video range, to be used in DMX-based applications.

Product code: DMX-POWERPORT-375
Category: Lighting
Rack units: 1U
Weight: 2.33 kg
Power: 450 W

Specifications

Physical

Width: 220mm (single or double unit 19” rack-mountable with included rackmount ears)
Height: 44mm (rack mount 1U)
Depth: 289mm
Weight: 2.33 kg

Control and Programming

Control Protocols: DMX and RDM
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
DMX/RDM Transceiver IN/THRU: Opto-Isolated RS-485
DMX/RDM Transceiver OUT: Opto-Isolated RS-485
Setting and Addressing of connected fixtures: RDM
Firmware update: over DMX link using Martin Companion

Control/User Interface

Power output status: Green LED
Data Activity Status: Yellow LED
Fixture Test: Pushbutton to call up test pattern

Construction

Housing: Steel
Color: Matte Black
Protection rating: IP 20

Installation

Orientation: Any
Single Unit 19-inch Rackmount: Using supplied short and long rack mounting ears
Dual Unit 19-inch Rackmount: Using supplied coupling plates and short rack mounting ears
Wallmount: Using supplied short rack mounting ears
Trussmount Vertical: Using half-coupler clamp in M10 threaded hole, max. bolt length 20 mm
Trussmount Horizontal: Using halfcouplers in supplied short rack mounting ears

Connections

AC mains power IN: Neutrik powerCON TRUE1
AC mains power THRU: Neutrik powerCON TRUE1
DMX/RDM IN: Neutrik 5-pin male XLR socket
DMX/RDM THRU: Neutrik 5-pin female XLR socket
Combined power & data out: Neutrik 4-pin female XLR socket; All connections hot-plugging compatible

Electrical

AC mains power input: 100-240 V (nominal), 50/60Hz
Power supply unit: Auto-ranging electronic switch mode; Maximum permitted total current draw from 48Vdc OUT at 100-120 V mains power: 5.0 A; Maximum permitted total current draw from 48Vdc OUT at 173-240 V mains power: 7.5 A
Mains fuses: Double-pole/neutral fusing, 2x T6.3 A (slow-blow), 250 VAC
Maximum total power consumption: 450 W (including full load of connected fixtures)
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 9.6 A
Typical earth-leakage current: 1.7 mA

Thermal

Cooling: Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 45 °C
Minimum ambient temperature (Ta min.): -20 °C
Typical heat dissipation (calculated, +/- 10%): 300 BTU/hr. (not including connected fixtures, but with system at full load)

Environmental

RoHS: Compliant
REACH: Compliant

Approvals

EU safety: IEC/EN60950, IEC/EN62368-1
EU EMC: EN55032,EN55035, EN 61000-3-2, EN 61000-3-3
Australia/NZ: AS/NZS 62368.1:2018
Canadian / US Safety: CAN/CSA-C22.2 No. 62368-1/UL 62368-1
Canadian / US EMC: ICES-003,Class B / FCC 47 CRF § 15 Class B
India: BIS

Compatible Fixtures

VDO Sceptron 10; VDO Sceptron 20; VDO Sceptron 40; VDO Fatron 20; VDO Dotron; Exterior PixLine 10; Exterior PixLine 20; Exterior PixLine 40; Exterior Dot-HP RGB; Exterior Dot-HP CW; VC-Grid 15; VC-Grid 25; VC-Grid 30; VC-Grid 60; VC-Strip 15; VC-Strip 25; VC-Strip 30; VC-Strip 60; VC-Dot 1 (via VC-Feeder); VC-Dot 4 (via VC-Feeder); VC-Dot 9 (via VC-Feeder)

Included Items

1 x Safety Cable Attachment Eyelet, incl. screws; 2 x Short Rack Mounting Ears, incl. screws; 1 x Long Rack Mounting Ear, incl. screws; 1 x Coupling Plate, incl. screws; User Manual; Please note that a power input cable is not supplied with the product and must be ordered separately (see Accessories below)

Accessories

Power Input Cables: Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1, 1.5 m (4.9 ft.): P/N 91611797; Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1, 5 m (16.4 ft.): P/N 91611786; Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1, 1.5 m (4.9 ft.): P/N 91610173; Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1, 5 m (16.4 ft.): P/N 91610174
Power connectors: Power Connector, Cable Mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789HU; Power Connector, Cable Mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788HU
Power Thru Cables: Power Relay Cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784; Power Relay Cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785; Power Relay Cable, H07RN-F, 2.5 mm², TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796; Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170; Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171; Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172
Installation hardware: Super Lightweight Half Coupler Rigging Clamp, black (fits M10 threaded hole): P/N 91602018; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information

DMX PowerPort 375: P/N 90721094

Specification from Martin Lighting