Martin Lighting

Martin DCE DataSplitterBooster IP

The Martin DCE DataSplitterBooster IP is an indoor/outdoor power+data splitter for Martin Creative LED fixtures that is ideal for rental and install applications.

Product code: DCE-DATASPLITTERBOOSTER-IP
Category: Lighting

Specifications

Physical

Width: 124.0 mm (4.9 in.); Height: 40.0 mm (1.6 in.); Depth: 124.0 mm (4.9 in.); Weight: 0.5 kg (1.1 lbs.)

Data Interfaces

Control Protocols: P3, sACN, Art-Net and RDM over Art-Net; Protocol Detection: Automatic; Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net; sACN Compliance: ANSI E1.31 - 2018; Martin P3 Compliance: P3 System Controller Software 6.1.0 or newer; Ethernet Transceiver IN: 100Mbit; Ethernet Transceiver OUT 1-2: 100Mbit; Firmware Update: not applicable

Data Splitting & Boosting Functionality

Split: Split a DCE line in two branches; Boost: Extend maximum cable length between two devices from 90 m to 2x 90 m

Power Splitting & Boosting Functionality

Split: Passive split of DCE 48 VDC input in two branches; Boost: None, system power limitations still apply

Control/User Interface External

Power Status: 1x Green LED; Ethernet In Status: 1x Amber LED; Ethernet Out Status 1-2: 2x Amber LED

Construction

Color: Matte Black; Housing Material: Aluminium; Protection Rating: IP 66; NEMA Enclosure Rating: Type 3; Impact Resistance: IK 08; Corrosion Resistance: ISO 12944-6: 2018; C5 High, Test regime ISO 9227, 1440h; Vibration resistance: 1.0g Sinusoidal (IEC 60068-2-6) and 0.7g RMS Random (IEC 60068-2-64)

Installation

Orientation: Any; Wallmount: Flanges for installation on flat surface; Trussmount: Using half-coupler clamp in M10 threaded hole, max. bolt length 20 mm; Location: indoor or permanent outdoor

Connections

DC Power and Network input: 1x chassis-mount DCE hybrid connector (7pin); DC Power and Network output: 2x chassis-mount DCE hybrid connector (7pin); Max. distance between source (P3 PowerPort) or previous fixture and DCE DataSplitterBooster IP: 90 m; Max. distance between DCE DataSplitterBooster IP and following fixture or next DCE DataSplitterBooster IP: 90 m; Max. number of units in a daisy-chain: Unlimited, unless limited by power consumption; Surge protection: 4 KV; All connections hot plugging compatible

Electrical

Nominal Input Voltage: 48 VDC +/- 10%; Power Supply Options: Martin P3 PowerPort 2000, Martin P3 PowerPort 500 IP Rental, Martin P3 PowerPort 500 IP Install, Martin DCE PSU 240 IP or generic 48 VDC PSU; Power Consumption; Typical: 0.9 W *; * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.

Thermal

Cooling: Convection; Maximum Ambient Temperature (Ta max): 55° C (131° F); Minimum Ambient Temperature (Ta min): -30° C (-22° F); Maximum Surface Temperature, steady state, at 40° C ambient: 55° C (131° F); Typical Heat Dissipation (calculated, +/- 10%): 3 BTU/hr.

Environmental

RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant

Approvals

Global CB Certification/IECEE: IEC 62368-1
EU safety: EN 62368-1
EU EMC: EN 55032, EN55035, EN 61000-3-2, EN 61000-3-3
US safety: UL 62368-1
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 62368-1
Canadian EMC: ICES-003 Class B
Australia/NZ: RCM
United Kingdom: UKCA

Compatible Fixtures

VDO Sceptron XB; Exterior Dot-1 Pro (via Exterior DC-Feeder); Exterior Dot-4 Pro (via Exterior DC-Feeder); Exterior Dot-9 Pro (via Exterior DC-Feeder); Exterior Dot-HP Pro

Included Items

1x Multi-Language Safety & Installation Manual

Accessories

Pre-Assembled Hybrid DCE Cables; DC + Ethernet Cable DCE-DCE 1m: P/N MAR-91700100; DC + Ethernet Cable DCE-DCE 2.5m: P/N MAR-91700101; DC + Ethernet Cable DCE-DCE 5m: P/N MAR-91700102; DC + Ethernet Cable DCE-DCE 10m: P/N MAR-91700103; DC + Ethernet Cable DCE-DCE 25m: P/N MAR-91700104; Bulk Hybrid DCE Cables; DC + Ethernet Cable 100m: P/N MAR-91700105; DC + Ethernet Cable LSZH 100m: P/N MAR-91700106; Field-Installable DCE Connectors; Field-installable Connector DCE Male: P/N MAR-91700107; Field-installable Connector DCE Female: P/N MAR-91700108; Closing Caps for DCE Connectors; Closing Cap Male DCE Connector: P/N MAR-91700109; Closing Cap Female DCE Connector: P/N MAR-91700110; Hybrid DCE Adapters; DC + Ethernet Adapter DCE Male-Male: P/N MAR-91700111; DC + Ethernet Adapter DCE Female-Female: P/N MAR-91700112; DC + Ethernet Adapter EtherCON+Wires to DCE: P/N MAR-91700113; DC + Ethernet Adapter DCE to EtherCON: P/N MAR-91700114; Rigging Accessories; Super Lightweight Half Coupler Rigging Clamp, black: P/N 91602018; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006; Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information

DCE DataSplitterBooster IP: P/N MAR-90721204

Specification from Martin Lighting