LAWO

LAWO
Lawo Power Core
Meet the Super Node. Tons of I/O - digital, analog and AES67 / RAVENNA. Hundreds of routing crosspoints. Loads of DSP. All in just 1RU.
- Product code
- POWER-CORE
- Category
- Audio
Specifications
Power Core
- LICENSE CHART
- Compare license options
- SIGNAL PROCESSING
- Maximum of 96 Input channels, each with Input gain, signal presence indicator, direct out, Insert, fader, Aux send with Pre / Post switching, pan / balance, AutoGain for each mic input
- 5-parameter equalizer
- 3 fully-parametric bands plus 2 semi-parametric bands (can also be shelf, high-pass or low-pass filters
- Dynamics
- gate, expander, compression including side-chain filters, limiter and De-Esser
- Maximum of 8 individual AutoMix groups (up to 96 channels each) allow creation of multiple independent mixes
- All sources and all busses may be metered onscreen using EBU R128 Loudness Metering and/or PPM
- Sync delays of up to 5,300 ms with switchable units (meters, milliseconds, frames)
- Up to 80 summing busses depending on license, configurable as Program, Record, Aux, Group, Mix-Minus (clean feed) or General Purpose. A full DSP channel with EQ, Dynamics and Delay functions may be applied to any of these busses (up to 16 stereo or 32 mono busses)
- Channels and busses may be grouped into Stereo and 5.1 Surround bundles
- STANDARD AUDIO INTERFACES
- 4 MADI (each 64 channels I/O) with SFP cages (MADI ports 1 / 2 and 3 / 4 can be grouped as redundant interfaces)
- 4 RAVENNA / AES67 with SFP (up to 256 bi-directional streams with up to 512 I/O channels in total). May be grouped as redundant interfaces using SMPTE 2022-7 standard or LACP
- ST2110-30 compliant for seamless audio interchange in combined radio / TV broadcast plants
- Some interfaces may not be active with certain license packages. Please consult your Lawo representative for details.
- OPTIONAL EXTENSION PANELS
- 19”/1 RU panels with illuminated buttons, LCD-keys, pots & GPIO
- Control logic and levels for conferences, talkback and monitoring
- Connect up to 30 panels via CAN-Bus or TCP/IP
- AVAILABLE I/O EXPANSION MODULES
- 8 Mic / Line inputs
- 8 Mono / 4 Stereo Line inputs
- 8 Mono / 4 Stereo Line outputs
- 4 Stereo AES inputs with SRC + 4 AES output (bit-transparent)
- 4 HD-BNC AES inputs with SRC + 4 HD-BNC AES outputs (bit-transparent)
- 2 Mic / Line in + 2 Line out + 2 Stereo Headphone out
- 2 MADI (64 I/O channels each) with SFP cages
- 1 MADI incl. SRC (64 I/O channels) with SFP cage
- 2 DANTE (two redundant connections, 64 total channels)
- GPIO (8 GPI & 8 GPO, 2VCA inputs)
- CONTROL
- RAVENNA / AES67 discovery, connection management, and dynamic stream patching
- Ember+ and RAS control protocols over IP or serial connections for control of radio automation systems
- Integration with and control via Lawo VisTool, HOME, VSM, Intercom Server and DSA Line Scheduler
- Programmable logic core (for “On-Air” tallies, Fader Start commands, Talkback integration, etc.)
- Integrated, on-console control via IP of Lawo routing network
- TCP/IP, CAN, RS422 control protocols supported
- SYNCHRONIZATION
- PTP (IEEE 1588)
- Wordclock input and output
- MADI input and internal generator
- 48 kHz or 44.1 kHz
- SOFTWARE DEFINED FUNCTIONS
- Some features described are extra-cost options. Power Core products may be configured as a pure audio I/O device, mixing console engine, shared core for up to 4 independent mixing consoles (MAX version), or a router with extensive DSP capabilities. Ask your Lawo representative for detailed options and prices.