LAWO

Lawo Nova73 compact

Specifications

Configurable without interruption of operation

Integrated signal processing

Mono routing

Transparent transfer (Dolby-E compatible)

Clock-synchronised switching

96kHz enabled

Operating voltage 85 V to 265 V AC, 47 Hz to 63 Hz

19” / 7RU mounting frame; Dual-star backplane (STAR² architecture); 2 slots for central modules; 10 slots for I/O modules; Active ventilation, temperature surveillance; Integrated power supply 85…265 V AC / 47…63 Hz; Active modules are hot-pluggable and accessible from the front
Weight: 14,5 kg (incl. red. PSU)

Router 5120×5120 mono

I/O modules for RAVENNA, DANTE, MADI, and AES3 (max. AES 64 I/O)

DALLIS I/O system for decentralised structures and further interfaces

DALLIS breakout boxes for decentralized structures and additional interfaces; Analog Mic/Line (transformer or electronically balanced); Headphones (incl. VCA interface); AES/EBU (AES3); MADI (AES10); RAVENNA AoIP; Data transfer via RS422, RS232, MIDI; GPI (Opto-couplers, relays, VCA); Transparent transmission (Dolby® E compatible); DANTE I/O card for flexible networking (4 redundant ports); 4 Dante Brooklyn II modules; 4 redundant ports; Up to 64 input/64 output audio channels per port; Up to 256 input/256 output audio channels per device; I/O signal processing for every audio channel; I/O signal detect for every audio channel; Audio clock source for Dante network; System audio clock synchronization to Dante network (Multi-Channel Sync)
Sample Rate Converter (SRC): 44.1/48/88.2/96/176.4/192kHz

Sampling rates 48/44.1 kHz and 96/88.2 kHz
Possible clock sources: Wordclock, RAVENNA, AES3, Video, MADI or ATM/SDH; Additional internal generator; Clock output with current system clock; Complies with AES11 Grade 2

Integrated signal processing (DSP) with Gain/Phase, Balance, Mono Mixing and Silence Detect. Optionally also with:

EQ (parametric or graphic)

Dynamic units (Gate, AGC, Compressor, Limiter)

Delay (up to 10s)

Summing matrix (64 x 64 channels)

Timed faders

Signal monitoring

Control and configuration software included

Comprehensive control protocol Remote MNOPL (TCP/IP)

Integrated web server and SNMP for system diagnosis

Remote maintenance via VPN (ISDN available as option)

(optional)

Redundant router card

Redundant I/O modules (configurable)

Double ports (depending on module)

Redundant link with the I/O-system DALLIS

Phase-redundant power supply

DSHS topology possible