L-Acoustics
L-Acoustics
L-Acoustics LS10
LS10 is a plug-and-play Avnu-certified AVB switch that integrates seamlessly within the L-Acoustics ecosystem to further simplify connectivity, uniting audio and control distribution. LS10 runs out-of-the-box, providing a reliable Milan-AVB network solution that does not require IT expertise. Upgrade your Milan-AVB network experience with LS10.
- Product code
- LS10
- Category
- Audio
- Rack units
- 1U
- Weight
- 1.5 kg
- Power
- 10 W
Specifications
Power supply
- Mains rating
- 100 V - 240 V ( ±10%), 50-60 Hz
- connector
- lockable IEC connector C13
- Power consumption
- 10 W - 20 W max when powering another LS10
- Backup power circuit
- 24 V DC redundant power input; 24 V DC redundant power output
Interface
- indicators
- 1 LED for power status, 1 LED for fault status; 10 LEDs for link/act status
- button
- reset to factory settings
Remote control and monitoring
- L-Acoustics remote control software
- LA Network Manager
- General purpose inputs and outputs (GPIO)
- 1 user-configurator GPO
Operating conditions
- Temperature
- -5º C / 23º F to +50º C / 122º F
Network
- Ethernet ports
- 10 AVB ports at 1 Gb/s:; - 8 x Neutrik etherCON TM I/O (5 in the front, 3 in the back); - 2 × SFP cages (rear)
- Featured AVB entities
- Avnu-certified AVB bridge
- Standards
- IEEE 802.1BA-2011 standard augmented by Avnu ProAV 1.1 requirements
- Number of supported AVB streams
- 150
- Startup time
- Ready to forward AVB streams in 5 seconds
Ethernet port features
- Management
- gPTP grandmaster capable, priority selection; RSTP: enable/disable
- Port sensing
- Auto negotiation
- Auto crossover
- MDI / MDIX (allows to use straight or cross cables)
- Autosensing
- Full or Half Duplex (Gigabit is always Full Duplex Mode)
Physical data
- Height
- 1U
- Weight
- 1.5 kg / 2.2 lb
- Protection rating
- IP30
