L-Acoustics
L-Acoustics LA7.16

L-Acoustics

L-Acoustics LA7.16

Multi-channel amplified controller

Product code
LA7.16
Category
Audio
Rack units
2U
Weight
15.8 kg

Specifications

Amplification and power supply

Amplification class
High-efficiency class D
Output power, all channels loaded
16 x 1100 W at 4 ohms; 16 x 1300 W at 8 ohms; 16 x 700 W at 16 ohms
nominal power requirements
16 A (200-240 V) 30 A (100-120 V)
mains connector
32 A powerCON
Power supply model
Universal Switched Mode Power Supply (SMPS) with Power Factor Correction (PFC)
Mains rating
100 V - 240 V ±10%, 50-60 Hz
External DSP backup voltage input
24 V DC

DSP

Digital Signal Processor (DSP)
Gen.5 Dual SHARC 32-bit, floating point, 96 kHz sampling rate
I/O routing
16 x 16 routing and summation matrix
Per output channel
Built-in EQ station with 8 IIR, 4 FIR linear phase EQ filters; Array morphing (LF contour, zoom factor), Air absorption compensation filters; Internal IIR and FIR EQ algorithms for speaker phase linearization and improved impulse responses; Output delay from 0 to 1000 ms

Technologies

loudspeaker management
L-DRIVE advanced system protection
amplifier management
L-SMART adaptative power management

Latency

standard latency (analog/digital inputs)
3.84 ms
low latency (analog/digital inputs)
1.18 ms

Inputs

Milan-AVB
16 channels from up to 16 streams (of up to 8 channels each)
AES/EBU
2 channels AES/EBU (1 x AES3) with SRC
analog
1 channel analog
connections
2 etherCON 1 Gb/s I/O+ control 1 male 12-point terminal block (AES3 or Ana input/link + GPIO)

Outputs

loudspeaker connections
1 SC32 connector

Circuits protection

Mains and power supply
Over and under voltage / over temperature / overcurrent
Power outputs
Overcurrent / DC / short circuit / over temperature

Interface

display/indicators
1 TFT color touchscreen display (480 × 128 px)
Display
1 encoding wheel with push button

Remote control and monitoring

L-Acoustics remote control software
LA Network Manager
General purpose inputs and outputs (GPIO)
3 in/out on 12 point terminal block
Third-party management solutions
Q-SYS® / Crestron®

Operating conditions

Temperature
-5º C / 23º F to +50º C / 122º F

Physical data

Height
2U
Weight
15.8 kg / 34.8 lb

Specification from L-Acoustics