L-Acoustics
L-Acoustics
L-Acoustics LA2Xi
LA2Xi Amplified controller for install
- Product code
- LA2XI
- Category
- Audio
- Rack units
- 1U
- Weight
- 4.4 kg
Specifications
Amplification and power supply
- Amplification class
- High-efficiency class D
- Output power, all channels loaded
- 4 x 640 W at 4 ohms (SE); 4 x 360 W at 8 ohms (SE); 4 x 190 W at 16 ohms (SE); 2 x 1260 W at 8 ohms (BTL); 1 x 2550 W at 4 ohms (PBTL)
- Power supply model
- Universal Switched Mode Power Supply (SMPS) with Power Factor Correction (PFC)
- Mains rating
- 100 V - 240 V ±10%, 50-60 Hz
- External DSP backup voltage input
- 24 V DC
DSP
- Digital Signal Processor (DSP)
- Gen.4 Dual SHARC 32-bit, floating point, 96 kHz sampling rate
- I/O routing
- Flexible 4x4 routing matrix
- Per output channel
- Built-in EQ station with 8 IIR, 4 FIR linear phase EQ filters; Array morphing, Air absorption compensation filters; Internal IIR and FIR EQ algorithms; L-DRIVE advanced system protection; Output delay from 0 to 1000 ms
Technologies
- loudspeaker management
- L-DRIVE advanced system protection
Latency
- standard latency (analog/digital inputs)
- 3.84 ms
- low latency (analog/digital inputs)
- 0.84 ms
Inputs
- Milan-AVB
- 4 channels from 1 stream (of up to 8 channels)
- AES67
- 4 channels from 1 stream (of up to 8 channels each) (48 kHz only)
- AES/EBU
- 4 channels AES/EBU (2 x AES3) with SRC
- analog
- 4 channels
- connections
- 2 etherCON 1 Gb/s I/O+ control; 4 male 3-point terminal blocks (2 x switching analog/AES3); 2 male 3-point terminal block AES3 active links; Optional I/O-CON panel
Outputs
- loudspeaker connections
- 2 Female 4 point terminal blocks; Optional I/O-CON panel
Circuit protection
- Mains and power supply
- Over and under voltage / over temperature / overcurrent
- Power outputs
- Overcurrent / DC / short circuit / over temperature
Interface
- display/indicators
- LED's only
Control and monitoring
- L-Acoustics remote control software
- LA Network Manager
- General purpose inputs and outputs (GPIO)
- 4 in/out on 10 point terminal block
- External DSP backup voltage input
- 24 V DC / 0.5 A on 2-point terminal block
- Third-party management solutions
- Q-SYS® / Crestron® / Control4® / Savant®/ HTTP / Extron® / WebUI
Operating conditions
- Temperature
- -5º C / 23º F to +50º C / 122º F
Physical data
- Height
- 1U
- Weight
- 4.4 kg / 9.7 lb
- Protection rating
- IP30
