L-Acoustics

L-Acoustics LA1.16i

Multi-channel amplified controller for install

Specifications

Amplification class: High-efficiency class D
Output power, all channels loaded: 16 x 80 W at 8 ohms; 16 x 160 W at 4 ohms; 8 x 300 W at 8 ohms
nominal power requirements: 10 A (220 - 240 V) 15 A (120 V) 20 A (100 V)
mains connector: IEC V-Lock compatible
Power supply model: Universal Switched Mode Power Supply (SMPS) with Power Factor Correction (PFC)
Mains rating: 100 V - 240 V ± 10%, 50 Hz - 60 Hz
External DSP backup voltage input: 24 V DC

Digital Signal Processor (DSP): Gen.5 Dual SHARC 32-bit, floating point, 96 kHz sampling rate
I/O routing: 16 x 16 routing and summation matrix
Per output channel: Built-in EQ station with 8 IIR, 4 FIR linear phase EQ filters; Array morphing (LF contour, zoom factor), Air absorption compensation filters; Internal IIR and FIR EQ algorithms for speaker phase linearization and improved impulse responses; Output delay from 0 to 1000 ms

Milan-AVB: 16 channels from up to 16 streams (of up to 8 channels each)
AES67: 16 channels from up to 16 streams (of up to 8 channels each) (48 kHz only)
AES/EBU: 2 channels AES/EBU (1 x AES3) with SRC
analog: 1 channel analog
connections: 2 etherCON 1 Gb/s I/O+ control 1 male 12-point terminal block (AES3 or Ana input/link + GPIO)

Mains and power supply: Over and under voltage / over temperature / overcurrent
Power outputs: Overcurrent / DC / short circuit / over temperature

L-Acoustics remote control software: LA Network Manager
General purpose inputs and outputs (GPIO): 3 in/out on 12 point terminal block
Third-party management solutions: Q-SYS® / Crestron® / HTTP / WebUI