L-Acoustics

LA1.16i

LA1.16i Multi-channel amplified controller for install

Specifications

Amplification class: High-efficiency class D
Output power, all channels loaded: 16 x 80 W at 8 ohms 16 x 160 W at 4 ohms 8 x 300 W at 8 ohms
nominal power requirements: 10 A (220 - 240 V) 15 A (120 V) 20 A (100 V)
mains connector: IEC V-Lock compatible
Power supply model: Universal Switched Mode Power Supply (SMPS) with Power Factor Correction (PFC)
Mains rating: 100 V - 240 V ± 10%, 50 Hz - 60 Hz
External DSP backup voltage input: 24 V DC

Digital Signal Processor (DSP): Gen.5 Dual SHARC 32-bit, floating point, 96 kHz sampling rate
I/O routing: 16 x 16 routing and summation matrix
Per output channel: Built-in EQ station with 8 IIR, 4 FIR linear phase EQ filters Array morphing (LF contour, zoom factor), Air absorption compensation filters Internal IIR and FIR EQ algorithms for speaker phase linearization and improved impulse responses Output delay from 0 to 1000 ms

Milan-AVB: 16 channels from up to 16 streams (of up to 8 channels each)
AES67: 16 channels from up to 16 streams (of up to 8 channels each) (48 kHz only)
AES/EBU: 2 channels AES/EBU (1 x AES3) with SRC
analog: 1 channel analog
connections: 2 etherCON 1 Gb/s I/O+ control 1 male 12-point terminal block (AES3 or Ana input/link + GPIO)

Mains and power supply: Over and under voltage / over temperature / overcurrent
Power outputs: Overcurrent / DC / short circuit / over temperature

L-Acoustics remote control software: LA Network Manager
General purpose inputs and outputs (GPIO): 3 in/out on 12 point terminal block
Third-party management solutions: Q-SYS® / Crestron® / HTTP / WebUI