Kanex Pro

Kanex Pro AUD-DTE-LINEIN

Dante 2CH Analog Line Input Adapter

Specifications

Audio Input: 2CH balanced/unbalanced analog audio (6-pin 3.5mm phoenix connector)
Audio Output: Dante 2CH digital audio (RJ45 PoE)
Sampling Rate: 44.1 / 48 / 88.2 / 96kHz @24-bit
Sensitivity Levels: +24dBu, +4dBu, 0dBu, 0dBV, −10dBV (per channel)
Max Input Level (Balanced): +24dBu (12.28Vrms)
Max Input Level (Unbalanced): +18dBu (6.15Vrms)
Input Impedance (Balanced): 20kohm
Input Impedance (Unbalanced): 10kohm
Frequency Response: 20Hz-20kHz (±0.5dB)
S/N Ratio: >100dB @0dBu, 1kHz (A-weighted)
Dynamic Range: >100dB @0dBu, 1kHz (A-weighted)
THD+N: <0.01% @+4dBu, 1kHz
Audio Delay: 1 / 2 / 5ms (configurable via Dante Controller)
Output Sync Delay: <10ms
Protocol: Dante / AES67 RTP
Network Bandwidth: 100Mbps
Transmission Distance: 328ft / 100m (CAT6/6A/7)
ESD Protection: IEC 61000-4-2 ±8kV air / ±4kV contact
Power Input: USB-C 5V/500mA or PoE IEEE 802.3af Class 0
Power Consumption: 2W max
Dimensions: 115mm (W) x 40mm (D) x 28mm (H)
Weight: 94g
Housing: Plastic enclosure
Operating Temperature: 0°C - 40°C
Storage Temperature: −20°C - 60°C
Operating Humidity: 20% - 80% RH (non-condensing)
Storage Humidity: 10% - 90% RH (non-condensing)
1x: Dante 2CH Line Input Adapter
1x: 6-pin 3.5mm Phoenix Connector (male)
2x: Hook & Loop