Ikegami
Ikegami
Ikegami Dockable Microwave Transmitter for Wireless Camera
- Product code
- DOCKABLE-MICROWAVE-TRANSMITTER-FOR-WIRELESS-CAMERA
- Category
- Video
- Weight
- 15 kg
Specifications
- Camera to be combined
- Ikegami HK-399PW or HL-60W only
- Transmission Frequency
- 2.2 to 2.5GHz (1.9 to 2.1, 2.4 to 2.7GHz possible. 3,5GHz is possible as option). 8CH selectable via keyboard. Programmable via software.
- EIRP
- 500mW as standard. Different power radiation and frequencies also upon request and in accordance with the local PTT regulations.
- Video Input
- YUV analogue, SDI, Digital signal (exclusive format) in preparation for Profile Level 2 (s. below)
- Audio Input
- Analog signal x 3, camera front mic / rear line input/incom. Camera front mic configurable at head and adjustable at rear. Rear line input -20dBm, +/- 10dB adjustable. Intercom carbon or dynamic selectable.
- Profile level 1
- MPEG-2, SP@ML with 60ms latency Option : 4:2:2P@ML
- Profile level 2
- Propritary format (take pattern from MPEG4) with currently 12ms latency (with genlock option).
- Bit Rate
- 2.5Mbps to 15Mbps (depends on modulation), Option: 25Mps
- Modulation
- COFDM, DVB-T (8MHz, 2k Mode), QPSK/16QAM/64QAM, Guard-interval, coding rate is selectable. See other table.
- Transmission antenna
- Non-directional active airial, passive gain 5dBi , active gain 22dBi max.
- Transmission range
- Without any obstacle: 1000m@QPSK, 500m@16QAM, 250m@64QAM
- Power Consumption
- Aprox. 22W
- Weight
- Aprox. 2.5Kg
- Receiving signal
- Signal transmitted by camera adaptor
- Receiving system
- Space diversity (FFT-MRC) 2 or 6 way diversity
- Video output
- Digital signal: SDI x 2 (Embedded Audio) Analogue signal: Composite x 2, PM x 2
- Genlock input
- BBS at BSW-500. Camera head genlock optional/analogue, int. terminated
- Audio output
- Analogue signal: 3 channels: front mic., rear input, talk back
- Receiving antenna
- Flat antenna (9dBi, outdoor,studio), OMNI (5dBi, studio/indoor) or 17dBi directional for outdoors, connected via BDC.
- TX Frequency
- 450-470 MHz depending on local PTT regulations.
- Transmission output
- 10mW. Other power radiation and frequencies upon request and in accordance to local PTT regulations..
- Command input
- OCP-399 x 1 / MCP-120 x 1, R Tally / G Tally: 1 each (contact), Scan-Ctrl (16:9).
- Interfaces
- Tally out (R/G) μPC:remote monitoring (Dengvision) Aux: remote panel control IFout: option repeater output ASI in: option repeater input ASI out: 2x 2x or 6x UHF input/ 24V DC 1A each
- Transmission antenna
- Non directional, Gain 2dBi
- Power Consumption
- Approx. 115VA (100-240V, 50-60Hz)
- Weight
- Approx. 15Kg
