Annotator Series

Specifications

Number/signal type: 2 RGBHV, RGBS, RGsB, component video (Y, R-Y, B-Y; progressive or HD) 1 RGBHV, RGBS, RGsB, component video (Y, R-Y, B-Y; interlaced, progressive, HD), S-video, composite video 1 component video (Y, R-Y, B-Y; interlaced), S-video, composite video 1 S-video, composite video 1 single link DVI-D 1 optional SDI, HD-SDI
Connectors: 2 female 15-pin HD: RGBHV, RGBS, RGsB, component video 5 female BNC: RGBHV, RGBS, RGsB, component video, S-video, composite video 3 female BNC: component video, S-video, composite video 2 female BNC: S-video, composite video 1 female DVI-I: DVI-D 1 female BNC: optional SDI, HD-SDI
Nominal level: 1 Vp-p for Y of component video and S-video, and for composite video 0.8 Vp-p for SDI 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video
Minimum/maximum levels: Analog: 0.0 V to 2.0 Vp-p with no offset
Impedance: 75 ohms
Horizontal frequency: Autoscan 15 kHz to 100 kHz
Vertical frequency: Autoscan 24 Hz to 120 Hz
Resolution range: 640x480 to 1920x1200*, 480i, 480p, 576i, 576p, 720p, 1080i, and 1080p, digitized pixel for pixel; higher resolutions are undersampled. *Reduced blanking
Return loss: <-30 dB @ 5 MHz
DC offset (max. allowable): 0.5 V

Digital sampling: 30 bit, 10 bits per color; 13.5 MHz standard (video), 165 MHz standard (RGB, YUVp, DVI)
Colors: 1 billion, 1024 per color channel
Encoder (for scan converted output): 10 bit digital
Horizontal filtering (for scan converted output): 3 levels
Vertical filtering (for scan converted output): 3 levels
Encoder filtering (for scan converted output): 3 levels

Number/signal type: 2 buffered scaled RGBHV, RGBS, RGsB, or HD component video (Y, R-Y, B-Y) 1 MTP 1 optional output in one of the following formats: • single link DVI-I (for unique scaled output) • DVI-D • 3G/HD-SDI • interlaced RGsB, component video, S-video, composite video
Connectors: 6 female BNC: RGB or component video 1 female 15-pin HD: RGB or component video 1 female RJ-45: output to an MTP device 1 slot for an optional output card with one of the following options: • 1 female DVI-I (analog and digital, unique scaled output) • 1 female DVI-I (digital output) • 1 female BNC (3G/HD-SDI output) • 3 female BNC (interlaced RGsB, component, S-video, composite video output)
Nominal level: 1 Vp-p for Y of component video and S-video, and for G of RGsB 0.8 Vp-p for SDI 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video
Minimum/maximum levels: 0.0 V to 1.0 Vp-p
Impedance: 75 ohms
Scaled resolution: 640x480 6,8,9 , 800x600 6,8,9 , 852x480 6,8,9 , 1024x768 6,8,9 , 1024x852 6,8,9 , 1024x1024 6,8,9 , 1280x768 6,8,9 , 1280x800 6,8,9 , 1280x1024 6,8,9 , 1360x765 6,8,9 , 1360x768 6,8,9 , 1365x768 6,8,9 , 1365x1024 6,8,9 , 1366x768 6,8,9 , 1400x1050 6,8 , 1440x900 6,8,9 , 1600x1200 6,8 , 1680x1050 6,8 , 1920x1200 6,8 HDTV: 480p 7,8 , 576p 6 , 720p 3,4,5,6,7,8 , 1080i 6,7,8 , 1080p 1,2,3,4,5,6,7,8 , 1080p CVT 8 , 2048x1080 1,2,3,4,5,6,7,8 SDTV: NTSC, PAL (with optional scan converter output card)

Input type: RGBHV, RGBS, RGsB, RGBcvS, and component video (tri-level or bi-level)
Output type: RGBHV, RGBS, RGsB, and component video (tri-level or bi-level)
Standards: NTSC 3.58, NTSC 4.43, PAL, SECAM Optional SDI/HD-SDI: SMPTE 259M-C, SMPTE 292M
Input level: 2.75 V to 5.0 Vp-p for RGBHV or RGBS 0.6 Vp-p for component video tri-level sync 0.3 Vp-p for component video bi-level sync or RGsB
Output level: 5.0 Vp-p for RGBHV or RGBS 0.6 Vp-p for component video tri-level sync 0.3 Vp-p for component video bi-level sync or RGsB
Input impedance: Horizontal: 75 ohms Vertical: 510 ohms
Output impedance: 75 ohms
Polarity: Positive or negative (selectable)

Serial control port: 2 RS-232/RS-422, female 9-pin D connectors (rear panel) 1 RS-232, 2.5 mm mini stereo jack (front panel)
Baud rate and protocol: 9600 (default), 19200, 38400, 115200 baud, adjustable; 8 data bits, 1 stop bit, no parity

9-pin D connector: RS-232: 2 = Tx, 3 = Rx, 5 = GND RS-422: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+
2.5 mm mini stereo jack: Tip = Tx, ring = Rx, sleeve = GND
Ethernet control port: 1 RJ-45 female connector
Ethernet data rate: 10/100Base-T, half/full duplex with autodetect
Ethernet protocol: ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
Ethernet default settings: Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Gateway = 0.0.0.0 DHCP = off
Web server: Up to 200 simultaneous sessions 40 MB nonvolatile user memory
Program control: Extron control/configuration program for Windows ® Extron Simple Instruction Set (SIS ™ ) Microsoft ® Internet Explorer ® , Telnet

Number/signal type: 20 USB devices (via hubs) 2 serial devices 1 PS/2 mouse 1 PS/2 keyboard
Connectors: 2 USB type A 2 RS-232, female 9-pin D (shared with standard control) 2 female PS/2

Power supply: Internal Input: 100-240 VAC, 50-60 Hz
Power consumption: 30 watts
Ambient temperature/humidity: Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling: Convection, vented on sides and top
Thermal dissipation: 97 BTU/hr

Rack mount: Yes, with included brackets.
Furniture mount: Yes, with optional under-desk or through-desk mounting kit
Enclosure type: Metal
Enclosure dimensions: 1.7" H x 17.5" W x 12.0" D (1U high, full rack wide) (4.3 cm H x 44.4 cm W x 30.5 cm D) (Depth excludes connectors and knobs.)
Product weight: 6.8 lbs (3.1 kg)
Shipping weight: 11 lbs (5 kg)
DIM weight: 12 lbs (6 kg)
Vibration: ISTA 1A in carton (International Safe Transit Association)

Documents are hosted by the manufacturer; these are links to their files.