Evertz
500ACO2-HD/SD

Evertz

500ACO2-HD/SD

The 500ACO2-HD/SD dual HD/SD Autochangeover is designed to provide extension to the 5600ACO for HD or SD SDI, DVB-ASI, AES audio, bi-level/tri-level syncs and NTSC/PAL video. The unit can also be operated as a standalone changeover unit with two independent 2X1 switchers. The 500ACO uses latching relays to ensure maximum reliability and minimal disruption in the event of any failure.

Product code
SD
Category
Video

Specifications

Serial Video Input

Standards
SMPTE ST 292-1, SMPTE ST 259-A, B, C, D (143 to 540Mb/s), DVB-ASI, bi-level/tri-level syncs or NTSC/PAL video
Number of Inputs
4
Connector
BNC per IEC 61169-8 Annex A
Maximum Cable Length
100m of Belden 1694A or equivalent cable combined input and output
Return Loss
10dB up to 1.5Gb/s

Serial Video Output

Number of Outputs
2 passive relay outputs
Connector
BNC per IEC 61169-8 Annex A
Maximum Cable Length
100m of Belden 1694A or equivalent cable combined input and output
DC Offset
0V ±0.5V
Return Loss
10dB up to 1.5Gb/s

Type

Inputs
Opto-isolated input with internal pull-up to +5V.
Outputs
Normally 10k internal pull-up to +5V. Ground to rear panel when relay is in active position.
Connector
Two 3 pin terminal blocks with one ground each.
Signal Level
+5V nominal

Physical

Number of Slots
1

Electrical

Voltage
+12V DC
Power
6 Watts
EMI/RFI
Complies with FCC Part 15 Class A, EU EMC Directive

Ordering Information

500ACO2-HD/SD
Dual HD/SD-SDI Digital Auto 2x1 Signal Changeover

Enclosures

500FR
3RU Exponent Compact High Density Distribution Frame
S501FR
500 Series Standalone Enclosure

Accessories

500FC
VistaLINK® Frame Controller
VUE-TOUCH2-12R
2RU Touch Screen with 12 Rotary Encoders, rack-mountable control panel, tailored with base VUE widgets for Interfacing with Router, Multiviewer and Infrastructure Controls. Optimized Control Interface for Device Control workflows.

Documents

Documents are hosted by the manufacturer; these are links to their files.

Specification from Evertz