Evertz
Evertz
2408LT
The 2408LT is an outdoor fiber optic transmitter for RF signals in the satellite L-Band or wider frequency range. It accepts a single RF input on coaxial cable and provides a single output for optical transmission. Packaged in a compact, standalone enclosure, the 2408LT is ideal for mounting on or near the satellite dish antenna structure. The -WP version features dust and water protection allowing outdoor mounting without a secondary enclosure. A full power RF monitor output provides a convenient means of obtaining peak satellite signal strength, or additional signal distribution.
- Product code
- 2408LT
- Category
- Video
Specifications
RF Input
- Number of Inputs
- 1
- Connector
- F-Type (50Ω BNC optional)
- Conductor Range
- 23-18 AWG (0.26 – 0.82mm 2 )
- Input Impedance
- 75Ω (50Ω optional)
- Frequency Range
- 40MHz to 3GHz Note: 10MHz supported on specific modules. Please contact Evertz for more information on 10MHz transport.
Return Loss
- 40 – 500MHz
- > 11dB
- 500MHz – 3GHz
- > 15dB
- Input Power Range
- -10dBm to -60dBm
- Manual Gain Range
- +2 to +30dB in 2dB steps
- AGC Hold Range
- -8 to -38dBm ±2dBm
- Input IP3
- +10dBm
- IMD
- < -55dBc at -15dB input and minimum gain
LNB Power
- Voltage
- 13V DC, 18V DC, off (selectable)
- Current
- 500mA
- Protection
- Short circuit, current limited
- LO Control
- 22kHz on/off (selectable)
RF Monitor Output
- Number of Outputs
- 1
- Connector
- F-Type (50Ω BNC optional)
- Conductor Range
- 23-18 AWG (0.26 – 0.82mm 2 )
- Output Impedance
- 75Ω (50Ω optional)
- Return Loss
- > 15dB
Frequency Range
- Output Level
- Within -2dB of input signal
Optical Output
- Number of Outputs
- 1
- Connector
- Female FC/APC
Operating Wavelength
- Standard
- 1310nm DFB
- CWDM
- 1270-1610nm
Output Power
- Standard 1310nm
- +2dBm
- CWDM
- +2dBm
Flatness
- 950 – 2150MHz
- ±1.5dB
- 40MHz – 3GHz
- ±2.0dB, ±0.25dB on 36MHz BW to 2.3GHz
- Gain Variation over Temperature
- ±2dB (from -20°C to 70°C)
10MHz Performance
- Manual Gain Range
- -5 to +10dB
- Input Power Range
- +10 to -40dBm
- OIP3
- +29dB
- Harmonic Rejection
- +60dB
DC Input
- Voltage
- +18V DC nominal, +11 to +20V DC range (> LNB minimum input voltage required when powering an LNB)
- Power
- 2 watts maximum excluding LNB Power
- Connector
- F-Type
- Conductor Range
- 23 – 18 AWG (0.26 – 0.82mm 2 )
Physical
- Dimensions
- 5.4" L x 2.4" W x 1.2" H (138mm x 61mm x 31mm) including flanges
Compliance
- Laser Safety
- Class 1 laser product, complies with 24 CFR 1040.10 and 1040.11 IEC 60825-1
- Safety
- CSA listed to CAN/CSA 60065-03 UL Std No. 60065-2006 IEC 60065:2001 + Amd 1:2005, IEC 62368-1:2014 EN 62368-1:2014 + A11:2007, CAN/CSA-C22.2 No. 62368-1:14, UL 62368-1 2nd Ed.
- EMI/RFI
- Complies with FCC Part 15, Subpart B EN 55022:1998 ICES-003
Environmental
- Temperature
- -30 to 75°C
- Dust / Water Protection
- IP65 (-WP version only)
Ordering Information
- 2408LT13
- L-Band Standalone Fiber Transmitter with VistaLINK and SmartMON, FC/APC fiber connectors
- 2408T13-10MHz-B50
- Standalone 10MHz RF over Fiber Transmitter, 1310nm DFB laser, 50Ω BNC connectors
- 2408LTA13-5V-B50
- Standalone L-Band fiber transmitter, 1310nm DFB laser, 5V DC powering for GPS antenna. 50Ω BNC Connectors
- 2408LTxx
- L-Band Standalone Fiber Transmitter with SmartMON, CWDM DFB laser, FC/APC fiber connectors (Wavelength 27 to 61)
- 2408Txx-10MHz-B50
- Standalone 10MHz RF over Fiber Transmitter, CWDM DFB laser, FC/APC, 50Ω BNC connectors
Ordering Options
- +PS
- 18V DC external power supply, 100 – 240V AC auto-ranging input, indoor mounting with F-Type connector
- -WP
- Weatherproof
Connector And Impedance Options
- Notes
- • Standard RF connectors are 75Ω F-Type
Ordering Options
- -B50
- 50Ω BNC connectors
- -S50
- 50Ω SMA connectors
Documents
Documents are hosted by the manufacturer; these are links to their files.
