Evertz
Evertz
2400ODU-8
The 2400ODU-8 is a compact, IP65 rated weatherproof enclosure that provides a convenient, pre-integrated package for fiber transport of satellite and other signals within the extended L-Band range. The 2400ODU-8 can house up to 8x active fiber transmit ([[2408LT]]) or receive ([[2406LR]]) modules and an 8-channel power supply ([[2400PSUA-8]]).
- Product code
- 2400ODU-8
- Category
- Video
Specifications
RF Specifications
- Frequency Range
- 50 – 3000MHz (10MHz ref. modules available)
- Input Power Range
- -10dBm to -60dBm
- Noise Figure
- 7dB (@ 31.5dB Tx gain)
- Group Delay
- ±0.5ns for 36MHz transponder
LNB Power
- Voltage
- 13V/18V DC, off (selectable)
- Current
- 500mA
- Protection
- Short circuit, current limited
- LO Control
- 22kHz on/off (selectable)
RF Monitor Output
- Number of Outputs
- 1 per RF input/output
- Output Level
- Within ±2.0dB of input signal
Optical Specifications
- Tx Wavelength
- 1310nm DFB laser (1550nm and CWDM optional)
- Rx Wavelength
- 1270nm-1610nm
- Output Power
- +2dBm
- Optical Sensitivity
- -14dBm @ 35dB S/N on a 36MHz carrier
- Optical Budget
- -16dB
Connectors
- RF Connectors
- F-Type (BNC optional)
- Impedance
- 75Ω (50Ω optional)
- Fiber Connectors
- Female FC/APC
Physical
- Without Flanges
- 9" D x 16" W x 16" H (229mm D x 407mm W x 407mm H)
- Knockouts
- 2x 0.75"
- Finish
- RAL7035 textured light grey powder coat
Environmental
- Temperature
- -30 to +80°C
- Dust / Water Protection
- IP65
Power
- Number of Inputs
- Single or dual (protected) power sources can be accommodated
- Connector
- Dual IEC 320 male input connectors, inside enclosure
- Voltage
- Auto-ranging, 100 – 240V AC
- Frequency
- 47 – 63Hz
- Power
- 1A maximum per input
- Notes
- • For additional information and specifications on the included or companion items, please refer to each individual product datasheet.
Ordering Information
- 2400ODU-8-B50
- Outdoor enclosure for RF fiber system, BNC 50Ω
- 2400ODU-8-F75
- Outdoor enclosure for RF fiber system, F-Type 75Ω
Ordering Options
- Notes
- • Standard RF connectors are F-Type 75Ω.
- 2400PSUA-8
- 8-channel power supply for 2406LR/2408LT series
- 2400ODU-4GT
- Replacement gas tubes for 2400ODU surge suppressors, package of four
Connector and Impedance Options
- -B50
- 50Ω BNC connectors
- -S50
- 50Ω SMA connectors
Transmitter/Receiver Ordering Options
- 2408LT13
- L-Band/wideband standalone fiber transmitter, SmartMON™, 1310nm DFB laser
- 2408T13-10MHz
- 10MHz standalone fiber transmitter, 1310nm DFB laser
- 2408LTxx
- L-Band standalone fiber transmitter, SmartMON™, CWDM DFB laser
- 2408Txx-10MHz
- 10MHz standalone fiber transmitter, CWDM DFB laser
- 2408LT13-5V
- L-Band/wideband standalone fiber transmitter, 1310nm DFB laser, 5V DC ±0.2V DC power input
- 2406LR
- L-Band/wideband standalone fiber receiver
- 2406LR-10MHz
- Standalone 10MHz fiber receiver, standard sensitivity, F-Type 75Ω, FC/APC connectors
- 2406BIAST-2
- High-performance dual-channel bias tee, passes through DC and L-Band with 10MHz reference multiplexer
- 2406BIAST-2-LNB
- High-performance dual-channel bias tee, passes through DC and L-Band with 10MHz reference multiplexer, external DC input option for built-in LNB powering
- 2406BPX-RF
- 2x1 standalone RF protection switch, 10 – 2250MHz, DC passing, 75Ω F-Type connectors
- 2406ET13-F2+SC
- Ethernet transceiver, dual fiber, 1310nm Tx, single-mode fiber only
- 2406DT13-F2+SC
- Data Transceiver, dual fiber, 1310nm Tx, single-mode fiber only
Mux/Demux Ordering Options
- 3400CWDM-M4-AP-SA
- Standalone 4-channel CWDM mux, 1510-1570nm, LC/APC connectors
- 3400CWDM-D4-AP-SA
- Standalone 4-channel CWDM demux, 1510-1570nm, LC/APC connectors
- 3400CWDM-M8-AP-SA
- Standalone 8-channel CWDM mux, 1470-1610nm, LC/APC connectors
- 3400CWDM-M8LB-AP-SA
- Standalone 8-channel CWDM mux, 1270-1450nm with expansion port, LC/APC connectors
- 3400CWDM-D8-AP-SA
- Standalone 8-channel CWDM demux, 1470-1610nm, LC/APC connectors
- 3400CWDM-D8LB-AP-SA
- Standalone 8-channel CWDM demux, 12
Documents
Documents are hosted by the manufacturer; these are links to their files.
