ENTTEC

CCC4

ENTTEC’s CCC4 is the ultimate high-precision, constant current (CC) LED dimmer. Designed for precise colour rendering and high-power installations.

Specifications

Connectors: 1 x power input (Screw Terminal), 1 x DMX input (Screw Terminal), 1 x PLink In (RJ45) 1 x PLink Out (RJ45), 4 x CC Output (Screw Terminal)
Max. data cable length: DMX: 300m per chain / PLink 300m between each CCC4

Data input protocols: DMX512A / PLink
Data output protocols: PLink
RDM functionality: Start address configuration, temperature monitoring, firmware updatable
Start address configuration options: PLink using Pixelator series controller / DMX/RDM (Default channel: 1)
Dimming resolution: 8/16-Bit
Fixture modes (channel footprint): 8-Bit RGB (3ch), 8-Bit RGBW (4ch), 16-Bit RGB (6ch), 16-Bit RGBW (8ch)
Data input capability per chain: DMX: up to 1 universe / PLink: up to 8 universes
Pulse Width Modulation (PWM) frequency: 1KHz - fixed

Input voltage: 12-48V DC
Max. current rating: Max. 4.5A (in 4ch mode)
Max. output power: 48W (@12V) / 96W (@24V) / 192W (@48V)
Device max. power draw: 1.5W
Max. current per channel: 1A
Reverse polarity protection: Yes (from power port only)
Over temperature protection: Yes (output intensity will dim to black over 3 seconds, dim back to the received value once temperature has dropped)
User-serviceable fuse: ATO 5A blade fuse
Cooling method: convection
Operating temperature: 0°C to +50°C / 32°F to 122°F
Environmental operating humidity: 5 - 95% (non-condensing)