Digital Projection

Digital Projection E-Vision 16000i WU

The E-vision 1000i shares the same advanced usually reserved for high-end 3-Chip products and boasts 16,000 lumen output

Product code: E-VISION-16000I-WU
Category: Video
Family: e-vision-16000i-wu
Weight: 29.4 kg
Power: 900 W

Specifications

Colour System: Laser Phosphor with Colorboost (Red Laser).; Phosphor wheel: 2 x 7200rpm (120Hz); Colour wheel: 4 Segment RGBY 2 x 7200rpm (120Hz)
Display Type: 1 x 0.8" HEP DMD™ (High E cency Pixel)
DMD Specification: 1920 x 1200 pixels native display.; Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16x10
Key Features: Video & Graphics Processing; Nexus electronics platform; HDMI 2.0; DisplayPort 1.2; 10-bit colour processing (30-bits per pixel) 1,073,741,824 colours; Hue, Saturation and Gain colour management.; 24p and 1080p native display.; HDR support; Input source automaticaly detected; Selectable Dynamic Black; Syncronisation of active glasses or polarising switcher.; DICOM simulation mode; Optics engine sealed to IP6X; Geometry Correction; Vertical & Horizontal Keystone correction; Four Corner adjustment; Rotation -100 to +100 with +/- 0.25° per step; Selectable aspect ratios: 5:4 / 4:3 / 16:10 /16:9 / 1.88 / 2.35 / TheaterScope / Source /; Unscaled; Digital Zoom 0% ~ 100%; Blanking control for custom input window sizing.; Scaling for xed aspect ratio screens.16:10 / 16:9 / 4:3 / 2.35:1; Custom warp; Edge Blending; Correction for non-active pixels at the edge of the display.; HDBaseT® Interface; Built in support for transmission of uncompressed High Definition Video over standard; CAT5e/6 LAN cable.; Allows the projector to be placed up to 100m from the source with low cost cabling.; HDBaseT® Includes Ethernet 100BaseT and RS232/IR control.; Colour Processing; Powerful seven point colour correction for accurate colour matching.; Projector LAN Control; Free Digital Projection Projector Controller II software; Intuitive user interface for network control.; At-a-glance monitoring of projector status.; Simultaneous control of user-de ned groups of projectors.
Source Compatibility: 3G-SDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.; Graphics standards up to WQXGA 2560 x 1600 60 Hz RB (DisplayPort); Video standards up to HDTV 1080p - 60Hz, with support for 4K-UHD (3840 x 2160) 60Hz; Display Support for 3840 x 2160 (4K-UHD) up to 60Hz and 4096 x 2160 (4K) up to 60Hz; Video & Computer; Type Connector Qty; HDMI 2.0 (HDCP compatible) HDMI 2; DisplayPort 1.2 DisplayPort 2; HDBaseT 8P8C "RJ45" 1; 3G-SDI in BNC 1; 3G-SDI out BNC 1; .; Communication & Control; Type Connector Qty; 3D Sync In BNC 1; 3D Sync Out (loop through) BNC 1; 3D Sync Out for IR BNC 1; LAN / Art-Net EtherCON RJ45 1; HDBaseT/Ethernet/RS232/IR RJ45 1; Serial In RS-232C 9-pin D-Sub 1; Serial Out RS-232C 9-pin D-Sub 1; Wired Remote In 3.5mm Stereo Jack 1; Wired Remote Out 3.5mm Stereo Jack 1; 12V Trigger 12V 350mA 3.5mm Stereo Jack 1; USB Power out 5V/2A USB Type A 1; Auto; Side by Side; Top and Bottom; Dual Pipe; Frame Sequential
HDTV Formats Supported: SDTV (480i, 576i), EDTV (480p, 576p), HDTV (720p, 1080i, 1080p), NTSC (M, 3.58/4.43 MHz), PAL; (B,D,G,H,I,M,N), SECAM (B,D,G,K,K1,L) Display Support for 2K 2048 x 1080 up to 60Hz and 4K-; UHD 3840 x 2160 up to 60Hz
Computer Compatibility: VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA up to 120hz RB, Mac
Remote Control: Infrared Remote Control Unit
Automation Control: LAN - Webpage control; TCP/UDP control; RS-232; Alert Mail for Projector; LAN Control-Crestron® Connected; LAN Control-PJ Link Class 1 compatible; LAN Control-AMX® Device Discovery; Art-Net (DMX) control
Colour Temperature: User selectable (3200K/ 5400K / 6500K / 7500K / 9300K / Native )
Typical illumination Life: 20,000 hours
Lenses: Lens Part No. Optimised Focus Lens Shift (Frame); Range*; 0.31 - 0.33:1 zoom 124-318 0.38 - 3.01m Vert: +/- 50%; Hor: +/- 20%; 0.55 - 0.75:1 zoom 124-319 0.69 - 6.58m Vert: +/- 50%; Hor: +/- 20%; 0.74 - 1.08:1 zoom 124-320 0.75 - 12.19m Vert: +/- 50%; Hor: +/- 20%; 1.05 - 1.41:1 zoom 124-321 1.06 - 18.94m Vert: +/- 60%; Hor: +/- 20%; 1.4 - 2.11:1 zoom 124-322 1.47 - 27.86m Vert: +/- 60%; Hor: +/- 20%; 2.1 - 4.0:1 zoom 124-323 2.24 - 54.19m Vert: +/- 60%; Hor: +/- 20%; 3.9 - 7.0:1 zoom 124-446 4.3 - 90.57m Vert: +/- 60%; Hor: +/- 20%; * Lens focal ranges above are the optimised distances but are likely to focus further, please; contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series:; +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,
Lens Mount: Centred lens for installation exability; Motorised and programmable shift, zoom and focus.; Intelligent Lens Memory with 10 user-de nable preset positions (except UST lens).
Mechanical Mounting: Front/Rear Table; Front/Rear Ceiling; Adjustable Front/Rear Feet; Ceiling Mount compatible chassis with 6 o M4*0.7 mounting holes available, Maximum screw; length 16mm
Orientation: Table Top or Inverted: Yes; Pointing Up: Yes; Pointing Down: Yes; Roll (Portrait): Yes
Power Requirements: 100-240VAC 50/60Hz single phase 11A
Power Consumption: at 110VAC - typical 900 W, max 950 W in Normal mode; at 110VAC - typical 725 W, max 750 W in Eco mode; at 110VAC - typical 700 W, max 800 W in High Altitude mode; at 220VAC - typical 860 W, max 900 W in Normal mode; at 220VAC - typical 665 W, max 700 W in Eco mode; at 220VAC - typical 680 W, max 780 W in High Altitude mode
Thermal Dissipation: at 110 VAC: typical 3072 BTU/hr, max 3242 BTU/hr in Normal mode; at 110 VAC: typical 2474 BTU/hr, max 2560 BTU/hr in ECO mode; at 110 VAC: typical 2389 BTU/hr, max 2730 BTU/hr in High Altitude mode; at 220 VAC: typical 2935 BTU/hr, max 3072 BTU/hr in Normal mode; at 220 VAC: typical 2270 BTU/hr, max 2389 BTU/hr in ECO mode; at 220 VAC: typical 2321 BTU/hr, max 2662 BTU/hr in High Altitude mode
Fan Noise: Typical 39dB, max 41dB in Normal mode; Typical 36dB, max 38dB in ECO mode
Operating/Storage: Operating: 0 to 40 °C (32 to 104 °F)
Temperature: Force ECO over 35°C (95°°F)
Operating Humidity: 90% (with maximum temperature of 35°C (95°F)
Weight: 29.4 kg / 64.8 lbs
Dimensions: L: 598mm x W: 500mm x H:218mm; L: 23.54 inch x W: 19.68 inch x H: 8.58 inch
Safety & EMC Regulations: cTUVus, CB report, CCC (China), CECP (China Energy Conservation Program), China RoHS, FCC; part 15 Class A, FDA 21 CFR part 1040 (Except with respect to those characteristics authorised; by Variance Number 2021-V-0192, CE (European Economic Area), UKCA (United Kingdom), KC; (Korea), BSMI (Taiwan), RCM (Australia),IEC 60825-1 : 2014 - Class 1 Laser Product, IEC EN; 62471-5:2015 - Risk Group 2< br/>; This projector may become Risk Group 3 when an interchangeable lens with a throw ratio of; greater than 1.94:1 is installed; Such combinations of projector and lens are intended for professional use only and are not; intended for consumer use.; Accessory Part No.; *Dimensions included for reference only and are subject to change. Please download the full set of; CAD les for this display for more accurate information.; PDF CAD Drawings; AUTOCAD Drawings; STEP / IGS Drawings; User Guides; Laser Risk Group Document; Important Information (German); Important Information (French); Control Protocol; DIGITAL PROJECTION, LTD; Specifications subject to change without notice.; www.digitalprojection.com; ©2024 Digital Projection. DLP®, Digital Light; Processing™ and DMD are trademarks of Texas; Instruments, Inc; DIGITAL PROJECTION, INC; DIGITAL PROJECTION, CHINA
Part number: 123-523

Specification from Digital Projection