Digital Projection

Digital Projection
Digital Projection E-Vision 10000i 4K+ RGB
The E-vision 1000i shares the same advanced usually reserved for high-end 3-Chip products and boasts 16,000 lumen output
- Product code
- E-VISION-10000I-4K+-RGB
- Category
- Video
- Family
- e-vision-10000i-4k-rgb
- Weight
- 27 kg
- Power
- 500 W
Specifications
- Colour System
- Direct RGB Laser (no phosphor or color wheels)
- Display Type
- 1 x 0.8" HEP DMD™ (High E cency Pixel)
- DMD Specification
- 1920 x 1200 pixels native display. (3840 x 2400 via 4-way pixel shift technology); Fast transit pixels for smooth greyscale and improved contrast.
- Aspect Ratio
- 16x10
- Fill Factor
- 87%
- Key Features
- RGB illumination; The new E-Vision 10000i 4K+ RGB - an RGB illuminated 1-Chip projector. The single-chip; E-Vision eliminates the artifacts and color separation commonly associated with; projectors utilising a conventional colour wheel, while achieving 4K+ resolution; Video & Graphics Processing; Nexus electronics platform; HDMI 2.0; DisplayPort 1.2; 10-bit colour processing (30-bits per pixel) 1,073,741,824 colours; Hue, Saturation and Gain colour management.; 24p and 1080p native display.; HDR support; Input source automaticaly detected; Selectable Dynamic Black; DICOM simulation mode; Optics engine sealed to IP6X; Geometry Correction; Vertical & Horizontal Keystone correction; Four Corner adjustment; Rotation -100 to +100 with +/- 0.25° per step; Selectable aspect ratios: 5:4 / 4:3 / 16:10 /16:9 / 1.88 / 2.35 / TheaterScope / Source /; Unscaled; Digital Zoom 0% ~ 100%; Blanking control for custom input window sizing.; Scaling for xed aspect ratio screens.16:10 / 16:9 / 4:3 / 2.35:1; Custom warp; Edge Blending; Correction for non-active pixels at the edge of the display.; HDBaseT® Interface; Built in support for transmission of uncompressed High Definition Video over standard; CAT5e/6 LAN cable.; Allows the projector to be placed up to 100m from the source with low cost cabling.; HDBaseT® Includes Ethernet 100BaseT and RS232/IR control.; Colour Processing; Powerful seven point colour correction for accurate colour matching.; Projector LAN Control; Free Digital Projection Projector Controller II software; Intuitive user interface for network control.; At-a-glance monitoring of projector status.; Simultaneous control of user-de ned groups of projectors.
- Source Compatibility
- 12G-SDI, Supports a high data transfer rate of up to 12 gigabits per second (Gbps), enabling the; transmission of uncompressed 4K UHD (Ultra High Definition) video signals with a single; connector; Graphics standards up to WUXGA 1920 x 1200 - 120Hz RB, Up to WQXGA 2560 x 1600 60Hz RB; (DisplayPort); Video standards including HDTV 1080p - 60Hz and 4K+ (3840 x 2400) 60Hz; Support for colour gamuts up to REC 2020(BT2020); Video & Computer; Type Connector Qty; HDMI 2.0b HDMI x2; Display Port 1.2 DisplayPort x2; 12G SDI IN BNC x1; 12G SDI OUT BNC x1; HDBaseT 8P8C "RJ45" x1; .; Communication & Control; Type Connector Qty; 3D Sync In BNC 1; 3D Sync Out (loop through) BNC 1; 3D Sync Out for IR BNC 1; LAN / Art-Net EtherCON RJ45 1; HDBaseT/Ethernet/RS232/IR RJ45 1; Serial In RS-232C 9-pin D-Sub 1; Serial Out RS-232C 9-pin D-Sub 1; Wired Remote In 3.5mm Stereo Jack 1; Wired Remote Out 3.5mm Stereo Jack 1; 12V Trigger 12V 350mA 3.5mm Stereo Jack 1; USB Power out 5V/2A USB Type A 1; Auto; Side by Side; Top and Bottom; Dual Pipe; Frame Sequential
- HDTV Formats Supported
- EDTV (480p, 576p), HDTV (720p, 1080i, 1080p), 4K+ (3840 x 2400), DCI 4K (4096 x 2160)
- Computer Compatibility
- VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA, WQXGA
- Remote Control
- Infrared/Wired Remote Control Unit
- Automation Control
- LAN - Webpage control; TCP/UDP control; RS-232; Alert Mail for Projector; LAN Control-Crestron® Connected; LAN Control-PJ Link Class 1 compatible; LAN Control-AMX® Device Discovery; Art-Net (DMX) control
- Colour Temperature
- User selectable (3200K/ 5400K / 6500K / 7500K / 9300K / Native )
- Typical illumination Life
- 20,000 hours
- Lenses
- Lens Part No. Optimised Focus Lens Shift (Frame); Range*; 0.31 - 0.33:1 zoom 124-318 0.38 - 3.01m Vert: +/- 50%; Hor: +/- 20%; 0.55 - 0.75:1 zoom 124-319 0.69 - 6.58m Vert: +/- 50%; Hor: +/- 20%; 0.74 - 1.08:1 zoom 124-320 0.75 - 12.19m Vert: +/- 50%; Hor: +/- 20%; 1.05 - 1.41:1 zoom 124-321 1.06 - 18.94m Vert: +/- 60%; Hor: +/- 20%; 1.4 - 2.11:1 zoom 124-322 1.47 - 27.86m Vert: +/- 60%; Hor: +/- 20%; 2.1 - 4.0:1 zoom 124-323 2.24 - 54.19m Vert: +/- 60%; Hor: +/- 20%; 3.9 - 7.0:1 zoom 124-446 4.3 - 90.57m Vert: +/- 60%; Hor: +/- 20%; * Lens focal ranges above are the optimised distances but are likely to focus further, please; contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series:; +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,
- Lens Mount
- Centred lens for installation exability; Motorised and programmable shift, zoom and focus.; Intelligent Lens Memory with 10 user-de nable preset positions (except UST lens).
- Mechanical Mounting
- Front/Rear Table; Front/Rear Ceiling; Adjustable Front/Rear Feet; Ceiling Mount compatible chassis with 6 o M4*0.7 mounting holes available, Maximum screw; length 16mm
- Orientation
- Table Top or Inverted: Yes; Pointing Up: Yes; Pointing Down: Yes; Roll (Portrait): Yes
- Power Requirements
- 100-240VAC 50/60Hz single phase 6.0A
- Power Consumption
- 500W
- Thermal Dissipation
- 1,706 BTU/hr
- Fan Noise
- Normal mode: 34 dBA typical Silence Mode: Max 32 dBA
- Operating/Storage
- Operating: 0 to 40 °C (32 to 104 °F)
- Temperature
- Force ECO over 35°C (95°°F)
- Operating Humidity
- 90% (with maximum temperature of 35°C (95°F)
- Weight
- 27 kg / 59.5 lbs
- Dimensions
- L: 598mm x W: 500mm x H:218mm; L: 23.54 inch x W: 19.68 inch x H: 8.58 inch
- Safety & EMC Regulations
- TBD; Accessory Part No.; *Dimensions included for reference only and are subject to change. Please download the full set of; CAD les for this display for more accurate information.; Specifications subject to change without notice.; ©2024 Digital Projection. DLP®, Digital Light; Processing™ and DMD are trademarks of Texas; Instruments, Inc
- Part number
- 124-360