DiGiCo

SD11B

Bringing the firepower of seventh generation FPGA technology to the world’s most challenging and fast-paced broadcast environments, the SD11B packs unprecedented processing firepower into a 19-inch rack mount or table top format. Small enough to carry on the road or squeeze into the tightest of studio environments, the SD11B is as remarkable for its full feature set as it is for its diminutive footprint. With its steel chassis and polycarbonate-overlaid aluminium worksurface enveloping the trademark 15-inch TFT LCD touch screen and 12 touch-sensitive moving faders, the SD11B is the very epitome of strength and flexibility. Under The Hood The SD11B boasts 80 Channels at 48kHz or 96kHz, with the ability to create multi channels for 5.1 or more complex input configurations. Standard channel processing across both inputs and outputs includes Channel Delay, Single and Multi-Channel Presets, Hi- and Lo-pass filters @ 24dB/octave, six-band parametric EQ with band curve selection, Dual insert points, DiGiCo's DYN 1 (Compressor, De-esser or Multi Band Compressor) and DYN 2 (Gate, Compressor or Ducker). The console also benefits from 118 powerful assignable Dynamic EQ processors, working on each of the four standard parametric bands, plus there are also 118 Multiband Compressors and 118 DiGiTubes; regardless of how the console is set up, you won't lose any resources as all channels deliver the same pristine signal path and feature set. The master section incorporates 12 gangable 32 band graphic EQs, 8 stereo effects, and eight control groups (VCAs); using snapshots, you can switch between complete configurations in any live environment easier than ever before, be it at rehearsals, during system setup, or even mid-show. The console’s 24 busses are assignable as mono/stereo groups or auxiliaries, and a 12x8 output matrix, dual solo busses for PFL and on-air soloing in mono, stereo LCRS and 5.1; and an LR/LCR/LCRS/5.1 Master buss are available for even deeper configurability. Unlike all other digital console manufacturers, you don't lose Aux or Group Busses when using the Matrix as they are in addition, including the Master buss. I/O The SD11B sports a mighty local I/O section, including 16 mic/line inputs, eight line outs, two mono AES/EBU, one MADI port, and one dedicated D-Rack port. The console connects seamlessly with the DiGiCo 32 input, 8-output (expandable to 16) remote I/O D-Rack, while a factory-fit Optocore option connects to all DiGiCo racks and consoles in a redundant loop. Get instant access to 32 fully integrated low-latency Waves stereo MultiRacks, each with up to eight plug-ins per rack, by fitting the optional DiGiCo SoundGrid module linked to external SoundGrid or DiGiGrid servers, giving a total of 128 additional I/O.

Product code: SD11B
Category: Audio
Family: consoles

Specifications

Faders 12 x 100mm touch-sensitive, motorised

Screens 1 x 15” (38cm) LCD high – resolution touch screen

Meters 12 x 8-segment LED bargraph

Input Channels 80

Busses 24 + LR/LCR/LCRS/5.1 Master buss

Solo busses 2 stereo busses

Matrix 12 x 8 matrix (additional to busses above)

Control Groups 8, selectable for VCA-style, Moving fader, Mute Group

Graphic Eq 12 x 32-band, Gain +/- 12dB

Internal FX 8 Stereo FX processors

Local I/O 16 x mic/line on, 8 Line out, 2 x AES/EBU I/O

MADI interface 2 x 75 ohm BNC connectivity

D-Rack interface 1 x RJ45 shielded connectivity

MIDI interface In / Out / Through

VGA port DB-15 mini-female (1024 x 768 resolution)

USB ports 3 x USB2

Light connection 1 x XLR3 1.2 – 12V

Ext Sync Word clock, MADI

Headphone TRS unbalanced / 8-600 ohms 1/4 inch Jack

GPI 2 x 1/4 inch Jack

GPO 2 x 1/4 inch Jack

Physical

SD11 Dimensions 483mm/19inch (w) x 577mm/22.7inch (d) x 232mm/9.1inch (h)

SD11 Weight 24Kg

D-Rack 412mm/16.22inch (w) x 312mm/12.3inch (d) x 179mm/7inch (h)

D-Rack Weight 7.4Kg (16lbs)

Audio Specification

Sample Rate: 48kHz or 96kHz
Processing Delay: 2ms Typical @ 48k (80 Stereo Channels, Stage Input Through L-R Buss to Stage Output) 1.1ms @ 96k
Internal Processing: Up to 40-bit, Floating Point
A>D & D>A: 24-bit Converter Bit Depth
Frequency Response: +/- 0.6dB (20Hz – 20kHz)
THD: <0.05% @ Unity Gain,: 10dB Input @ 1kHz
Channel Seperation: Better Than 90dB: (40Hz – 15kHz)
Residual Output: <90dBu Typical
Noise: (20Hz – 20kHz)
Microphone Input: Better Than -126dB: Equivalent Noise
Maximum Output Level: +22dBu
Maximum Input Level: +22dBu

Processing Channel Specification Input Channel

Name: User-Defined / Presets
Channel Selection: Mono / Stereo / Multi
Input Routing: Main & Alternate Input
Analogue Gain: -20 to +60dB
Phase: Normal / Reverse
Digital Trim: -40 to +40dB
Delay: >1 Sec (Coarse & Fine Control)
DiGiTuBe: Drive 0.01 – 50.0; Bias 0 – 6
LPF: 20 – 20kHz, 24dB/Oct
HPF: 20 – 20kHz, 24dB/Oct
Insert A: (Pre EQ/Dyn) On/Off
Equalisation: 4 Band EQ: Parametric or Dynamic (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/ Hi Shelf, Hi/Hishelf) On/Off Freq; 20 – 20kHz Gain; +/- 18dB Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf) Dynamic EQ On/Off Over/Under Band On/Off Threshold; -60 – 0dB Attack; 500us – 100ms Release; 10ms – 10s Ratio; 1:1 – 50:1
Dynamics 1: Single or Multiband (3-Band) Compressor: On/Off Threshold; -60 – 0dB Attack; 500us – 100ms Release; 10ms – 10s Ratio; 1:1 – 50:1 Gain; 0 to +40dB with Autogain Option Link; Any Channel/Buss Hi Crossover; 20Hz – 20kHz Lo Crossover; 20Hz – 20kHz Knee : Hard, Med, SoftDe-Esser: Threshold : 20us – 20ms Release : 1ms – 100ms Ratio : 1:1 – 50:1 Ess-Band : Listen On/Off Ess-Band Filter Freq / Width: 20Hz – 20kHz
Dynamics 2: On/OffGate / Ducker: Threshold; -60 – 0dB Attack; 50us – 100ms Hold; 2ms – 2s Release; 5ms – 5s Range; 0 – 90dB Key; Any Source Key Listen Freq/Width; 20 – 20kHz Compressor: On/Off Threshold; -60 – 0dB Attack; 500us – 100ms Release; 10ms – 10s Ratio; 1:1 – 50:1 Gain; 0 to +40dB with Autogain Option Link; Any Channel / Buss Hi Crossover; 20Hz – 20kHz Lo Crossover; 20Hz – 20kHz S/C Source : Any Source S/C Listen : On/Off S/C Filter Freq/Width: 20Hz – 20kHz
Insert B: (Post EQ/Dyn) On/Off
EQ/Dyn order: EQ/Dyn or Dyn/EQ
Mute: Channel Mute / Hard Mute
Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
Channel Safe: Input, EQ, Dyn, Aux, Pan, Fade/Mute, Inserts, Buss, Directs, Full Safe
Output Routing: Buss, Insert A, Insert B, FX Direct: On/Off, Pre-Mute / Pre-Fade / Post-Fade, Level +/- 18dB
Fader: 100mm Motorised Fader ∞ to +10dB

Processing Channel Specification Aux / Group / Matrix Output

Name: User-Defined / Presets
Phase: Normal / Reverse
Digital Trim: -20 to +60dB
Delay: >1 Sec (Coarse & Fine control)
DiGiTuBe: Drive 0.01 – 50.0 Bias 0 – 6
LPF: 20 – 20kHz, 24dB / Oct
HPF: 20 – 20kHz, 24dB / Oct
Insert A: (Pre EQ/Dyn) On/Off
Equalisation: 4 Band Parametric or Dynamic : Parametric Only (Low/Lowshelf, Lower-Mid/Lowshelf, Upper-Mid/Hi Shelf, Hi/Hishelf) On/Off Freq; 20 – 20kHz Gain; +/- 18dB Q: 0.1 -20 (Parametric) / 0.10-0.85 (Shelf) Dynamic EQ On/Off Over/Under Band On/Off Threshold; -60 – 0dB Attack; 500us – 100ms Release; 10ms – 10s Ratio; 1:1 – 50:1
Dynamics 1: Single or Multiband (3-band) Compressor: On/Off Threshold; -60 – 0dB Attack; 500us – 100ms Release; 10ms – 10s Ratio; 1:1 – 50:1 Gain; 0 to +40dB with Autogain Option Link; Any Channel / Buss Hi Crossover; 20Hz – 20kHz Lo Crossover; 20Hz – 20kHz Knee : Hard, Med, SoftDe-Esser: Threshold: 20us – 20ms Release: 1ms – 100ms Ratio: 1:1 – 50:1 Ess-Band: Listen On/Off Ess-Band Filter Freq/Width: 20Hz – 20kHz
Dynamics 2: On/OffGate / Ducker: Threshold; -60 – 0dB Attack; 50us – 100ms Hold; 2ms – 2s Release; 5ms – 5s Range; 0 – 90dB Key; Any Source Key Listen Freq/Width; 20 – 20kHz Compressor: On/Off Threshold; -60 – 0dB Attack; 500us – 100ms Release; 10ms – 10s Ratio; 1:1 – 50:1 Gain; 0 to +40dB with Autogain Option Link; Any Channel/Buss Hi Crossover; 20Hz – 20kHz Lo Crossover; 20Hz – 20kHz S/C Source : Any source S/C Listen : On/Off S/C Filter Freq/Width: 20Hz – 20kHz
Insert B: (Post EQ/Dyn) On/Off
Mute: Channel Mute / Hard Mute
Solo: Solo Buss 1 / Solo Buss 2 / Both, Auto Solo
Channel Safe: Trim, EQ, Dyn, Fade/Mute, Inserts, Outputs, Full Safe
Output Routing: Outputs, Insert A, Insert B, FX
Fader: 100mm Motorised Fader ∞ to + 10dB

Documents

Documents are hosted by the manufacturer; these are links to their files.

Specification from DiGiCo