Datapath VisionHD4

VisionHD4 Specifications

Board Format

Full size 8 lane PCIe 3-0 interface, 111mm x 312mm (H x L)

Connectors

Two DMS59 high density video connectors

Maximum Sample Rate

170 Mpixels per second analogue RGB or 165 MHz DVI Analogue modes up to 340 MHz pixel clock can be captured using dual-pass sampling

Maximum Data Rate

800 MB/s bandwidth per capture processor, 3.2 GB/s for the card

Video Sampling

RGB: 24 bits per pixel/ 8-8-8 format

Video Capture Memory

256 MB per capture channel, triple buffered

Analogue RGB Mode Support

640×480, 800×600, 1024×768, 1280×1024, 1600×1200, 1920×1080, 1920×1200 and custom modes

DVI Single-Link Mode Support

640×480, 800×600, 1024×768, 1280×1024, 1600×1200, 1920×1080, 1920×1200 and custom modes

HD Modes

1080p, 1080i, 720p, 576p, 480p and 480i using a Component-DVI connector. For HDCP support contact the sales department for more information

Input Modes Detection

Direct DMA to physical or virtual memory buffers with full scatter-gather support DMA bandwidth: up to 800MB/s 16 independent DMA streams: Any mix of HD and SD sources, colour space, cropping and scaling parameters

Pixel Transfer Formats

RGB: 5-5-5, 5-6-5 or 8-8-8 (24 bit, 32 bit) pixels YUV: 16 bit (4:2:2) MONO: 8 bit

Update Rate

User defined, capture frame rate will match the source providing max data rate (800MB/s) is not exceeded. Multi-buffered to eliminate tearing artifacts

Video Format Options

Analogue RGB plus HSync and VSync (5 wire) Analogue RGB with Composite Sync (4 wire) Analogue RGB with sink on Green/ YPbPr (3 wire)DVI Single Link, HDMI 1.3

Operating system support

Up to Windows® 10 and Linux support (NOTE: Check Linux specific features with Sales)

Power Requirements

Max current at 1.9A @ 12V Max current at 2.5A @ 3.3A Max power 31 Watts

Operating Temperature

0 to 35 °C/ 32 to 96 °F

Storage Temperature

20 to 70 °C/ -4 to 158 °F

Relative Humidity

5% to 90% non-condensing

Warranty

3 years