Datapath Aligo TX100

Aligo TX100 Specifications

Input Connections

4 x HDMI 1 x 2.0 3 x 1.4 Supports single 4K input or 4 x HD inputs

HDCP Support

HDCP v2.2 or v1.4 (input 1), HDCP 1.4 only (inputs 2-4)

HDMI Pixel Clock Maximum

600 MHz @ 8-bit 4:4:4 (Input 1) 150MHz @ 8bit 4:4:4 (Inputs 2-4)

HDMI Pixel Clock Minimum

25 MHz

Typical resolutions HD Stream

Up to 150Mpixels/sec, maximum line length 2048 Examples: 1920 x 1080p at 60Hz (SMPTE timings) 1920 x 1200p at 60Hz (CVT-Reduced Blanking) 2048 x 1080p at 60Hz (CVT-Reduced Blanking)

Typical Resolutions, 4K Stream

Up to 600Mpixels/sec, maximum line length 4096 Examples: 3840 x 2160p at 60Hz (SMPTE timings) 4096 x 2160p at 60Hz (CVT-Reduced Blanking)

Scan Type

Progressive. Interlaced video not supported.

Video Sampling Formats [1] 10,12-bit modes coming soon

RGB 8-bit, RGB 10-bit[1],YCbCr 4:4:4 8-bit, YCbCr 4:4:4 10-bit[1], YCbCr 4:2:2 12-bit[1], YCbCr 4:2:0

Streaming Codecs and Profiles

DS10G by Datapath (visually lossless & low latency over 10Gb network) Additional H.264 SQX streaming at source resolution for each port

Network Connections

1x 10Gb SFP+ Fiber port (Lossless streaming interface), Note: Compatible 850nm multi-mode SFP modules are available as a separate accessory. 1x 1Gb RJ45 (Control/Management/Streaming port)

Multicast Streaming Support

Each source is available at any number of displays in parallel. Requires IGMPv2 enabled at network switch.

Audio Support

Transmit stereo HDMI embedded audio for each input independently routable to mulitple sinks. The embedded audio consists of up to four channel pairs encoded in PCM format, up to 96KHz sampling.

KVM Support

4x Type-B USB hosts ports for connecting to a USB host PC. HID device support (keyboard, mouse etc.) independently routable to sink.

Power Consumption

19W: 4 HD in, HD loop out, 10G, 1G and USB ports active. 17W: 4K in, 4K loop out, 10G, 1G and USB ports active.

Mechanical

205mm (l) x 162mm (w) x 34mm (h)

Weight

1Kg

Relative Humidity

5%-90% non-condensing