Datapath Aligo QTX100

Aligo QTX100 Specifications

Video Input Connections

4 x HDMI 2.0 full size connectors

HDCP Support

HDCP v2.2

HDMI Pixel Clock Maximum

600 MHz

HDMI Pixel Clock Minimum

25 MHz

Typical Resolutions, HD Stream

Up to 150Mpixels/sec, maximum line length 2048 Examples: 1920x1080p 60Hz (SMPTE timings) 1920x1200p 60Hz (CVT-Reduced Blanking) 2048x1080p 60Hz (CVT-Reduced Blanking)

Typical Resolutions, 4K Stream

Up to 600Mpixels/sec, maximum line length 4096 Examples: 3840x2160p 60Hz (SMPTE timings) 4096x2160p 60Hz (CVT-Reduced Blanking)

Scan Type

Progressive. Interlaced video not supported.

Video Sampling Formats [1] 10,12-bit modes coming soon

RGB 8-bit, RGB 10-bit[1],YCbCr 4:4:4 8-bit, YCbCr 4:4:4 10-bit[1], YCbCr 4:2:2 12-bit[1], YCbCr 4:2:0

Streaming Codecs and Profiles

DS10G by Datapath (visually lossless & low latency over 10Gb network) Additional H.264 SQX streaming at source resolution for each port

Network Connections

4x 10Gb SFP+ Fiber ports (Lossless streaming interface), Note: Compatible 850nm multi-mode SFP modules are available as a separate accessory. 1x 1Gb RJ45 (Control/Management port) 1x 1Gb RJ45 (Media port for SQX streaming)

Multicast Streaming Support

Each source is available at any number of displays in parallel. Requires IGMPv2 enabled at network switch.

Maximum Sources Per System

At least 220 (UHD), 650 (HD)

Audio Support

Transmit stereo HDMI embedded audio for each input independently routable to multiple sinks. The embedded audio consists of up to four channel pairs encoded in PCM format, up to 96KHz sampling.

KVM Support

4 x Type-B USB host ports for connecting to a USB host PC HID device support (keyboard, mouse etc.) independently routable to sink

Power Consumption

35W

Mechanical

318 x 176 x 43 mm

Weight

1.8Kg

Relative Humidity

5%-90% non-condensing